Who has an F -150 with a Flowmaster 40 Series single on and dual out?
#6
#7
Trending Topics
#8
well i think i need to refrain from that. i have to worry about getting pulled over as it is right now rofl. its not overly loud, but it definantly can be heard especially under acceleration. i had a friend who drives a small truck with a v6 get pulled over already. and it most certainly isn't loud. theres a new noise ordanance. but no what? i don't care rofl. it not overly loud by anymeans. but if my friend got pulled over with his v6, ive heard him floor it in that truck, its not very loud at all. sure your gonna hear it but its not even close to the bigger trucks in town.
edit: well i found a number engraved inot the muffler. i did a search here for that number. came up with the 40 series single in dual out muffler. scroll down til you find the one with the number 430402 under the gm trucks.
http://www.jegs.com/cgi-bin/ncommerc...08&prmenbr=361
edit: well i found a number engraved inot the muffler. i did a search here for that number. came up with the 40 series single in dual out muffler. scroll down til you find the one with the number 430402 under the gm trucks.
http://www.jegs.com/cgi-bin/ncommerc...08&prmenbr=361
Last edited by modru2004; 10-27-2003 at 08:26 PM.
#9
If you guys are getting pulled over for that, whatever you do, dont cut the cats off like I did. Last Saturday I cut both cats and both resonators off and stuck stainless steel pipes in thier place. There are a lot of Mustang boys around here and most of them run off-road H or X pipes, and my truck is even louder than them. I even had a guy in a Lightning ask me what i was running. But thank God for MIL eliminators, stuck those bad boys in and havent had a problem since.
Thread
Thread Starter
Forum
Replies
Last Post
dino360
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
3
12-14-2004 07:50 PM