I want to lower the back end on my 2015 F-350 by 2 inches... the fifth wheel camper I tow has no more adjustment on the hitch, and is still a bit nose high. I want to remove the 4" axle spacers and replace them with stock F-250 spacers... Does anyone have stock numbers ?

My local dealer is telling me that I need to find a f-250 on the lot with the exact same options as on my truck. I then need to give them that VIN# so they can search ?

I did this on my last Ford ( 2008 F-350 ) and did not go through all this .

 

I am in the middle of converting my 250 to 350. My stock 2" blocks for my '06 crew cab short bed are: 2c3z-5598-PA

 

where are you? maybe we can swap parts, I want the 4"

 

Eastern PA.. you?

 

After days of researching with the locals parts guy . here are the part numbers if anyone is doing the same thing _


Ford 1-3/4" (2") axle spacer 6C3Z-5598-A


Ford U-Bolts for smaller spacer - BC3Z-5705-K

 

Go to an auto wrecker and get them. They sell them for $20 a block up here in Canada!