68 F100 long bed 360 FE
#1
12-13-2016, 10:13 AM
#3
12-13-2016, 01:15 PM
Cargo Master
#4
12-13-2016, 01:31 PM
Post Fiend
#5
12-13-2016, 01:39 PM
It seems that some people aren't content typing one thread on a topic, so they type another.
In the OP's previous thread, I told him that there are FOUR possible main shafts for his RAT-H1 trans, differences being in length and tooth counts.
The OP typed what he thought was the trans ID number, but it's the casting number off the case...which is no help since the same case was used in cars.
I also told him that as long as the extension housing was the same length, that any RAT 3 speed manual from a 1967/76 F100/250 2WD w/an FE engine would swap.
In the OP's previous thread, I told him that there are FOUR possible main shafts for his RAT-H1 trans, differences being in length and tooth counts.
The OP typed what he thought was the trans ID number, but it's the casting number off the case...which is no help since the same case was used in cars.
I also told him that as long as the extension housing was the same length, that any RAT 3 speed manual from a 1967/76 F100/250 2WD w/an FE engine would swap.
#6
12-14-2016, 02:31 PM
It seems that some people aren't content typing one thread on a topic, so they type another.
In the OP's previous thread, I told him that there are FOUR possible main shafts for his RAT-H1 trans, differences being in length and tooth counts.
The OP typed what he thought was the trans ID number, but it's the casting number off the case...which is no help since the same case was used in cars.
I also told him that as long as the extension housing was the same length, that any RAT 3 speed manual from a 1967/76 F100/250 2WD w/an FE engine would swap.
In the OP's previous thread, I told him that there are FOUR possible main shafts for his RAT-H1 trans, differences being in length and tooth counts.
The OP typed what he thought was the trans ID number, but it's the casting number off the case...which is no help since the same case was used in cars.
I also told him that as long as the extension housing was the same length, that any RAT 3 speed manual from a 1967/76 F100/250 2WD w/an FE engine would swap.
#7
12-14-2016, 03:19 PM
Hotshot
This place shows as having a D0TZ7061D. Price it 1st. They used to be REAL expensive. Lately they have been better but they will know they are the only ones to have it.
Bob Allen Ford
913-381-3000
Thread
Thread Starter
Forum
Replies
Last Post
WindBlue72
1967 - 1972 F-100 & Larger F-Series Trucks
12
02-13-2019 02:45 AM
Sage¥
1961 - 1966 F-100 & Larger F-Series Trucks
26
06-22-2015 01:01 AM
Duct Tape Racing
1967 - 1972 F-100 & Larger F-Series Trucks
60
07-09-2012 04:51 AM
Keone
1961 - 1966 F-100 & Larger F-Series Trucks
2
03-24-2005 02:50 PM