Paging Ford Techs
#1
#2
Your dealer can print a OASIS report that shows all the factory codes for the parts put on the truck, but to my knowledge there isn't a print all for parts (and you should be paging the parts counter guys, not the techs). When I work with my parts department they have to pull up pieces page by page. I've never seen anything close to what you're looking for. Maybe you could go in and ask for a parts list needed for a 150 or 200k service interval to get you started on the right track?
#4
The following users liked this post:
#5
#7
IF you have your vehicle serviced at a dealership, their supposed to put one on their R/O. Simply ask them to run you a copy of it. It costs them nothing.
OR, you could ask at a dealership if they'd run you a copy. All they'd need is your VIN #. When I was a service writer, I ran them for folks when they ask for one.
OR, you could ask at a dealership if they'd run you a copy. All they'd need is your VIN #. When I was a service writer, I ran them for folks when they ask for one.
Thread
Thread Starter
Forum
Replies
Last Post
shanes66charger
1973 - 1979 F-100 & Larger F-Series Trucks
17
04-09-2009 07:08 PM