July'n to me BS thread
#229
#230
good morning missouri.. i need to go to the shop finish cleaning and moving the old truck cabs around.. then pull jeffs truck an trailer into the shop and off load 'bullet' at the far end the pull the bronco in the other end ...then get to work!! cant get nothing done off running around and playing in the flat-bump.... a few pics from yesterday
#232
#233
good afternoon all.../ i decided to take off of work early today..just too dang hot in the shop.. i did get some cabs moved and the tools put up and floors swept.. then brought jeffs truck in .. i know now what can fit in the shops pull through...
one bumpside loooong bed with a trailer and my S10 pulled in behind it.... that takes up the the whole pull thru part of the shop...
i used the S10 to pull 'bullet' offa the trailer.. will need to pull from the other end now so i can get the 89 bronco pulled in behind bullet and my street rod behind it.. then i will crank up the fan and get down to working on some trucks..
thats about all i can fit in the pull thru
had to move a few cabs and stuff around, just to get a little more working room in the shop.... i need a BIGGER shop..
bullet is ready to unload
one bumpside loooong bed with a trailer and my S10 pulled in behind it.... that takes up the the whole pull thru part of the shop...
i used the S10 to pull 'bullet' offa the trailer.. will need to pull from the other end now so i can get the 89 bronco pulled in behind bullet and my street rod behind it.. then i will crank up the fan and get down to working on some trucks..
thats about all i can fit in the pull thru
had to move a few cabs and stuff around, just to get a little more working room in the shop.... i need a BIGGER shop..
bullet is ready to unload
#235
#236
good morning missouri ..and rich.... i must be getting old and feeble i thought today was friday, so was getting ready to go to rich's.. now since i dont have to head up north i will try to get the flat-bump out from behind the shop (its trapped back there by trucks, trailers, parts and high weeds).. one day i will get this place cleaned up.... maybe in my next life
#237
#238
I'm getting lazy in my age. I want an electric start push mower.
I've had my Toro for 16 years and that darned thing takes a dozen pulls to start now. Used to only need two pulls.
#239
#240
Afternoon All!
I've been in the shop at 0530 all week and leaving around 1330 to beat the heat. I can't do anything bodywork related when the temperature gets over 90 degrees. Mud gets hard in less than a minute and paint comes out of the gun bone dry. I managed to get quite a bit done today and I plan on laying some color down in the morning.
RC. I have a couple hours of work in the morning, but I should be done by 0800 or 0900 . I figure we can head up early and take a lap through RS to see what we can find.
I've been in the shop at 0530 all week and leaving around 1330 to beat the heat. I can't do anything bodywork related when the temperature gets over 90 degrees. Mud gets hard in less than a minute and paint comes out of the gun bone dry. I managed to get quite a bit done today and I plan on laying some color down in the morning.
RC. I have a couple hours of work in the morning, but I should be done by 0800 or 0900 . I figure we can head up early and take a lap through RS to see what we can find.