I have been playing with this for 2 days now and i can seem to get the wire correct i need help on how to wire the newer model headlights to my factory harness, i did all the necessary modifications, now i just need to wire everything and its killing me..please help, and info pictures any help will be greatly appreciated

 

 

I could be wrong but I believe you just need these adapters.

 

Haha great minds think alike.

 

i bought that guy and it totally didnt work http://www.ebay.com/itm/141691584348?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

http://www.ebay.com/itm/141691584348?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
thats the one that i bought and it didnt work iv even moved the pins around

 

They're a little spendy but excellent quality- ya gets what ya pays fer!
http://www.dfuserpower.com/catalog/harness.php

The relay harnesses are excellent too.

 

Weird that they didn't work, are you completely sure the pins in the adapters are making full contact with the bulbs/factory truck wiring harness?

 

I've used 3 different sets myself. 2 were from eBay and one from Clay and all 3 were exactly alike just different prices. The ones from Clay broke the first night when I was putting them on but they worked and I zip tied them to keep them together and never had an issue. The second set did the same and I only went to the third set then the first set melted from a short. This set has done the same thing now (poorly made and don't make a great contact) so I'll be ordering another set and making sure they are fitted perfectly before I leave them be.