I have a situation where I am looking at five (5) Black/Pink wires on the harness side of my butt splice connectors and five (5) Black/Pink wires on the new FICM Connector with pigtail - how can I figure out which ones splice together if all five look alike.

The harness side wires/pins were falling out of the broken connector under the FICM - I now have no idea what Pin Position the harness side wires occupied in the broken connector - - -

I am taking the new connector w/pigtail and splicing it onto the wire harnesses leads with Pins on them inserted into the butt splice connector's.

I was told it doesn't matter because they are all the same color and thus do the same thing......... I'm not buying that scenario - every wire has a specific starting point and ending point...... Not Guessing With My Truck!!!

If anybody knows how to solve this please let me know quickly - I have a Fishing Trip (Reunion) that I am leaving for at 10:00 Sunday morning - 38 hours from now - PLEASE HELP!!!

 

As you'll notice Blk/Pink are all grounds.

 

Thank you for the quick post back - I have printed these out and thus know where they all go!!!

Thank You So Much - Maybe I'll make that fly fishing trip to the Owen's River
< Eastern Sierra's CA > yet!!!

Then it really doesn't matter which one goes to which one then - since they are all ground...

 

oh Ya -

In Case Anybody is reading this who might care where the Owen's River is:

BROWN'S CAMPGROUNDS

Thanks Again & Have A Great Weekend