No EGR Duty Cycle reading with ScanGauge II
#1
09-28-2014, 01:09 PM
Join Date: May 2014
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
No EGR Duty Cycle reading with ScanGauge II
Can't figure this one out. Have tried the following:
From DieselMac's What I Use spreadsheet
TXD: 07E022113C
RXF: 04620511063C
RXD: 3010
MTH: 000100010000
From docs sent with new ScanGauge II
TXD: 07E022113C
RXF: 04628511063C
RXD: 3010
MTH: 03E87FFF0000
From Amdriven2liv's documentation
TXD: 07E022166E
RXF: 04620516066E
RXD: 3010
MTH: 006440000000
All three give me a blank. Thanks
AJG
From DieselMac's What I Use spreadsheet
TXD: 07E022113C
RXF: 04620511063C
RXD: 3010
MTH: 000100010000
From docs sent with new ScanGauge II
TXD: 07E022113C
RXF: 04628511063C
RXD: 3010
MTH: 03E87FFF0000
From Amdriven2liv's documentation
TXD: 07E022166E
RXF: 04620516066E
RXD: 3010
MTH: 006440000000
All three give me a blank. Thanks
AJG
#2
09-28-2014, 06:12 PM
You can only watch a 'pid' in 1 of the 4 positions at the same time.
So, if you are watching them all at the same time it won't work.
Try watching other values in all 4 spots first - to make sure it's working.
Then change ONE of them to each of the 3 values you have.
The 1st and 2nd shouldn't interfere with the 3rd.. since they are different pics..
So, if you are watching them all at the same time it won't work.
Try watching other values in all 4 spots first - to make sure it's working.
Then change ONE of them to each of the 3 values you have.
The 1st and 2nd shouldn't interfere with the 3rd.. since they are different pics..
#3
09-28-2014, 06:37 PM
Join Date: May 2014
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
You can only watch a 'pid' in 1 of the 4 positions at the same time.
So, if you are watching them all at the same time it won't work.
Try watching other values in all 4 spots first - to make sure it's working.
Then change ONE of them to each of the 3 values you have.
The 1st and 2nd shouldn't interfere with the 3rd.. since they are different pics..
So, if you are watching them all at the same time it won't work.
Try watching other values in all 4 spots first - to make sure it's working.
Then change ONE of them to each of the 3 values you have.
The 1st and 2nd shouldn't interfere with the 3rd.. since they are different pics..
Thread
Thread Starter
Forum
Replies
Last Post