Free to a good home / Wanted parts requests 1987 - 1996
#662
#663
#664
Also does anyone know where to get this tailgate trim?
http://thumbs2.ebaystatic.com/d/l225...-Sc5_L3NFw.jpg
http://thumbs2.ebaystatic.com/d/l225...-Sc5_L3NFw.jpg
#665
i have 96 f 350 single cab w/460 truck is in rough shape manifold broke off which took a part of the block with it , truck runs fine just really lound going to buy another truck , trans needs rebult but drive shafts and axle are good going to be donating it , im in oxford mi 48371 pm me if u looking for something on it i will part out , tranfer case good
#666
Free to a good home / Wanted parts requests
As the title now states, these threads have been merged, until the rules have been properly described we will ask you guys to abide by the rules that were in place previously, in the case of any conflict between the 2 sets of rules disregard the rule, making a note to let us (mods) know.
I know this is pretty rough, but I will polish it very soon, now freebies and wanted parts will be on the same thread, so post away!.
I know this is pretty rough, but I will polish it very soon, now freebies and wanted parts will be on the same thread, so post away!.
#667
#668
#670
351W parts
Hi everyone,
I have some used Ford parts to go to a good home. These will fit a 351W 5.8L V8. They came off an '88, but will fit others as well.
(1) upper intake manifold (plenum)
(1) lower intake manifold
(1) set of fuel rails & regulator
(8) fuel injectors
(1) distributor cap
(1) ignition coil
(1) rotor
(1) ignition control module
(1) 94.5 inch micro v belt (some cracks)
(1) 91.25 inch micro v belt (almost new)
Also non engine related:
(2) door glass (& handles I think) - spoken for
(1) fuel sending unit from the rear tank (I think...)
(1) in-tank pump - Taken
(L & R) drum brake parts for F350 (single wheel)
(1) track bar for F350
I had a 8' bed as well but it was soooo rusty so I ran it over with the excavator
If I think of or find anything else I'll add to the list.
Hopefully someone can use these parts that I have no truck for anymore
I have some used Ford parts to go to a good home. These will fit a 351W 5.8L V8. They came off an '88, but will fit others as well.
(1) upper intake manifold (plenum)
(1) lower intake manifold
(1) set of fuel rails & regulator
(8) fuel injectors
(1) distributor cap
(1) ignition coil
(1) rotor
(1) ignition control module
(1) 94.5 inch micro v belt (some cracks)
(1) 91.25 inch micro v belt (almost new)
Also non engine related:
(2) door glass (& handles I think) - spoken for
(1) fuel sending unit from the rear tank (I think...)
(1) in-tank pump - Taken
(L & R) drum brake parts for F350 (single wheel)
(1) track bar for F350
I had a 8' bed as well but it was soooo rusty so I ran it over with the excavator
If I think of or find anything else I'll add to the list.
Hopefully someone can use these parts that I have no truck for anymore
#672