Free to a good home / Wanted parts requests 1987 - 1996
#286
I have a 94 and I found a new metal handle that really fits a 80 to 87 model Jeep and it is a perfect match to the plastic ones you get at the parts store and I got it a an aftermarket auto store if you have one around your place. I hope that can help you
#287
#288
If its the gray interior with power windows, locks and map pockets I would LOVE to get those door panels from it if they are in good condition and aren't broken at the mounts.
#289
#290
Join Date: Dec 2003
Location: Saskatoon, Saskatchewan
Posts: 89,683
Received 1,353 Likes
on
1,112 Posts
No money can change hands, remember that this thread is for freebies only!
#292
It is the gray interior with power windows, locks and map pockets, but the left panel is busted and the passenger one isn't very pretty.
#294
If you have the aluminum tailgate trim and need somebody to take it, i'm your guy. If not, thanks anyway.
#295
what rims does it have. im looking for 1 alloy one with the rivets. i wish you wernt so far away not even sure where you are if you had a bed liner too. got a ligh bar or anything looking for one of those.
#298
I am in need of a pair of Stock 3" wide F350 4x4 Diesel Springs 9000lbs capacity or a set with a 2-3 inch lift.
I am also looking for a Brush/Grill Guard and a decent condition front Bumper for 87-91 F-250/350
I almost forgot... I need Fuel sending units for my 88 F250 too 7.3 diesel .... Not to terribly concerned if the tubes are rotted out so long as the Rheostats function correctly. Mine are CRAP.
I have a windshield Washer tank and Bracket that is similar in design to the 88 Diesel tanks... But it has a smaller outlet hole than the diesel unit... Perhaps aftermarket.
I have a Right side OE tail light housing from my 88 F250 I replaced both of them with 92-96 lights and this 1 was still in good shape.
I also have a few working glow plug solenoids... timers don't work but the solenoids are ok. Would be good if you want to bypass the timer and you have a bad solenoid.
PM me if you have anything I need or you need anything I have.
I am also looking for a Brush/Grill Guard and a decent condition front Bumper for 87-91 F-250/350
I almost forgot... I need Fuel sending units for my 88 F250 too 7.3 diesel .... Not to terribly concerned if the tubes are rotted out so long as the Rheostats function correctly. Mine are CRAP.
I have a windshield Washer tank and Bracket that is similar in design to the 88 Diesel tanks... But it has a smaller outlet hole than the diesel unit... Perhaps aftermarket.
I have a Right side OE tail light housing from my 88 F250 I replaced both of them with 92-96 lights and this 1 was still in good shape.
I also have a few working glow plug solenoids... timers don't work but the solenoids are ok. Would be good if you want to bypass the timer and you have a bad solenoid.
PM me if you have anything I need or you need anything I have.
#300
Razzo, you need to help out in the forums a little while before you start asking for free parts. This thread is for the members. It doesnt look good making one post just for free parts.