Preparing a trans. swap
#1
Preparing a trans. swap
One of a couple projects on the truck I'm planning this winter is changing over from the c6, that was in the truck when purchased, to the original 3.03 toploader trans.
I've posted a couple threads before regarding this swap, so if anything sounds familiar, please bare with me.
Right now I'm having issues finding good diagrams regarding the clutch assembly and linkages leading from the throw out bearing to the clutch pedal its self.
The shifter linkages are already converted to floor shift, so thats nothing I'm concerned about.
I'm trying to find those exploded views/ diagrams so not only do I have a guide to putting the whole thing together, but too identify any missing parts I need to get my hands on.
Is the clutch hydraulic or strictly machanical? If anyone had pictures at all of their setup, that would also help a whole lot.
I've posted a couple threads before regarding this swap, so if anything sounds familiar, please bare with me.
Right now I'm having issues finding good diagrams regarding the clutch assembly and linkages leading from the throw out bearing to the clutch pedal its self.
The shifter linkages are already converted to floor shift, so thats nothing I'm concerned about.
I'm trying to find those exploded views/ diagrams so not only do I have a guide to putting the whole thing together, but too identify any missing parts I need to get my hands on.
Is the clutch hydraulic or strictly machanical? If anyone had pictures at all of their setup, that would also help a whole lot.
Thread
Thread Starter
Forum
Replies
Last Post
greg4269ub
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
9
11-03-2012 09:12 PM
Paul270
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
9
06-23-2010 08:11 PM
nighthawk285
1987 - 1996 F150 & Larger F-Series Trucks
44
02-06-2007 01:22 PM
oldcoupe42
Clutch, Transmission, Differential, Axle & Transfer Case
1
01-25-2005 11:41 AM