I got a 96 f250 ext. cab and need ball joints my axel is a dana 50 ttb and the drivers door says its a GAWR 3850. I've been reading that 3850 gawr is a Dana 44? If anyone can give me sum info would b much appreciated I'm a little confused

 

If it's an F250 it will have the Dana 50 TTB.

 

I know that it's a Dana 50 but my issue is the gawr. I've read that if it's a Dana 50 it's 4600 and not 3850 what my door says and I'm not sure which ball joints to get?

 

Original door? Someone changed it?

 

Not all f250s have the Dana 50. I believe that the d50s have the number 50 cast into the bottom of the third member, atleast all the ones I have seen had the number cast into them.

 

I believe after a certain year, all of the F250s received Dana 50 TTB axles. But regardless, looking at the axle will tell you what you really have, rather than relying on a door sticker.

 

It's stamped 50 so it is 4600 gawr?