When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is my family car haha! I have a wife and two little girls. That is why i have it.i drive it most every day,can tow most what ever i want and it is BA!
Richard...how about.ill take east of the miss...you get west...fair enough?
joseph,when u want me to come get that thing out of your way?
joseph,when u want me to come get that thing out of your way?
Whenever you want. I'm home sick today and will probably also be home sick for the next two days. You have my number, just check to make sure I'm home and give me like an hour's notice.
Oh man, good luck! i've done that before and its no fun at all. When I bought the mare (dually) he gave me receipts and it showed two of them being replaced and one power window motor. Right now I have all four doors working and I sure hope it stays that way!
I had both rear motors replaced on mine, had one go bad within 3 months, then the other started acting up, both ran really slow.
I'm just not using the back windows for now. I really need to tear out all the wiring for the rear doors and re-do it all before i start replacing anything else. For now I have 3 electric locks that work and the front windows work. No worries with that in the winter, but it would be nice to have all 4 work in the summer (and the a/c which I never got figured out when it broke).
Of course, my motorcycle is getting all the miles right now. 1/3 the fuel cost and less than 1/3 the parking costs on campus (and better parking spots).
Of course, my motorcycle is getting all the miles right now. 1/3 the fuel cost and less than 1/3 the parking costs on campus (and better parking spots).
That's dedication right there. I'm a few hours south of you and I would already have given up riding a bike. It's gotten too darn cold for that.
In the winter I stay in the warmth of my cab with my heated seat pad...
Trouble with the 10lb roll is it getting wire off of a tangled spot and stopping. If the roll isn't wound real well it will slide the rollers trying to get the wire thru even if you adjust the tension on the feed rollers.