Good Machine Shops in the KC Area?
#1
Good Machine Shops in the KC Area?
1- Does anybody know of any GOOD machine shops in the KC area? I would prefer one closer to the Kansas side if possible to reduce travel time since I will probably have to make several trips
2- Do you guys know of a good engine balance shop in the KC area?
3- Does anyone know of a good dyno tune shop in the KC area?
2- Do you guys know of a good engine balance shop in the KC area?
3- Does anyone know of a good dyno tune shop in the KC area?
#2
Good Machine Shops in the KC Area?
I 've used a few shops but not one I'd recommend. The only place I get decent work done I have to go sit on the guy or he'll take forever. For every place somebody recommends I find somebody else who has had a problem there. Let us know if you find a good machine shop.
#3
Good Machine Shops in the KC Area?
If you are still looking for a good machine shop contact Clay County Rebuilders in Claycomo, Mo. 816-454-0932. They have a pretty extensive machine shop and from what I have heard and seen do really good work. They are located about 1 mile east of I-35 on Vivion Rd. Look for the modified class race car hanging on the building Shops in the rear
Last edited by Torque1st; 06-11-2003 at 03:28 AM.
#4
Good Machine Shops in the KC Area?
They were recommended to me also by Midwest Motorsports
Clay County Engine Rebuilders
816-454-0932
46 E 69 Hwy
Claycomo, MO 64119
Are they located about a mile west of the Ford plant?
MMS also said to check out:
CAMPBELL CRANKSHAFT
913-236-6789
1103 Southwest Blvd
KC, KS 66103
Does anybody know if Midwest Motorsports is still in operation? They had mostly Cheby stuff but some Ford and a lot of Fabrication goodies for making your own stuff.
Their old website does not list the KC store.
http://www.midwestmotorsportsinc.com/
The KC store tel # was 913-334-0477
they were located at: 6285 State Ave KC KS
If you guys need to get TIB trucks aligned here is a place that can do it right:
CROSS / MIDWEST TIRE 913-321-3000
2880 FAIRFAX TRAFICWAY
(RIGHT IN THE MIDDLE, 1-1/2 MI FROM GM)
If you need driveshaft work:
INLAND TRUCK PARTS
913-492-7559
14531 W 101ST TERRACE
Olathe KS
I-35S TO X215 (7Hwy)
Turn R & R AGAIN AT MCDONALDS
Leaf spring work: (great work!)
KC SPRING
816-421-3010
1631 CHERRY
KC MO, 64108
Coil spring work:
AMERICAN SPRING
816-842-6042
1817 LOCUST
KCMO, 64108
NE CORNER OF 19TH AND LOCUST, ON LOCUST
-Just a few numbers from my files...
Clay County Engine Rebuilders
816-454-0932
46 E 69 Hwy
Claycomo, MO 64119
Are they located about a mile west of the Ford plant?
MMS also said to check out:
CAMPBELL CRANKSHAFT
913-236-6789
1103 Southwest Blvd
KC, KS 66103
Does anybody know if Midwest Motorsports is still in operation? They had mostly Cheby stuff but some Ford and a lot of Fabrication goodies for making your own stuff.
Their old website does not list the KC store.
http://www.midwestmotorsportsinc.com/
The KC store tel # was 913-334-0477
they were located at: 6285 State Ave KC KS
If you guys need to get TIB trucks aligned here is a place that can do it right:
CROSS / MIDWEST TIRE 913-321-3000
2880 FAIRFAX TRAFICWAY
(RIGHT IN THE MIDDLE, 1-1/2 MI FROM GM)
If you need driveshaft work:
INLAND TRUCK PARTS
913-492-7559
14531 W 101ST TERRACE
Olathe KS
I-35S TO X215 (7Hwy)
Turn R & R AGAIN AT MCDONALDS
Leaf spring work: (great work!)
KC SPRING
816-421-3010
1631 CHERRY
KC MO, 64108
Coil spring work:
AMERICAN SPRING
816-842-6042
1817 LOCUST
KCMO, 64108
NE CORNER OF 19TH AND LOCUST, ON LOCUST
-Just a few numbers from my files...
#6
Good Machine Shops in the KC Area?
Sorry took so long- Clay Country rebuilders is about 1 mile west of the Ford Plant, as you head west on Vivion Rd. you'll see Showtime Trucks , then Clarks tools Outlet, -2 building up from Clarks you'll see the race car on the side of the building- shops in the back.
Thread
Thread Starter
Forum
Replies
Last Post