yamaha tri zinger parts
#1
yamaha tri zinger parts
have parts left form parted out yt 60 3 wheeler. can get any pics. call text reply pm. 315 371 5127. leave message. i havent listed is small parts such as cables and electrical. let me know what you need. any part is obo. make reasonable offer. NEED TO SELL THESE ASAP. CAN SHIP.
PARTS LEFT
rearend(hubs are welded to axel, axel i believe is a little bent but ive had it since i was 7 and im now 16 and have never had problems, no brakes)-$60
motor (runs great no problems drained the oil about a week ago by mistake but turnes over. if the wiring was hooked up it would probably start 3rd pull or so)-$70 SOLD
rear fenders(very rough but they will work)-$15
frame(no breaks or rewelding no bends very good shape)-$25
rims(1 has tire goes flat about 3 days almost bald, other rims bead is bent up a little trying to get old tires off but can be straightedend)-$15 for one with tire,$10 for ones without tire or $25 for all
gas tank(petcock vlave is seized no cracks or breaks)-$15
oil tank(no cap no breaks)-$10
handle bars(no known bends brake cable is junk, grips are wore)-$10
drive shaft(casing and shaft together)-$10
forks(have a little twist to them, ive gone the whole time i rode it like that,springs are very good)-$10
air filter box (no breaks, great shape)-$10
carb(kinda rough, put appoxy on bottom becuse it oxidized holes in it)-$10 SOLD
seat(been completely re duct taped gray, put a seat cover over and it will be fine)-$10
exhaust pipe(good shape no holes)-$10
handle bar chin protector(good shape blue)-$10
misc parts(have almost 2 of all electrical parts, cables ect let me know what you need that i havent listed)
<!-- END CLTAGS --><TABLE summary="craigslist hosted images"><TBODY><TR><TD align=middle></TD><TD align=middle></TD></TR><TR><TD align=middle></TD><TD align=middle></TD></TR></TBODY></TABLE>
PARTS LEFT
rearend(hubs are welded to axel, axel i believe is a little bent but ive had it since i was 7 and im now 16 and have never had problems, no brakes)-$60
motor (runs great no problems drained the oil about a week ago by mistake but turnes over. if the wiring was hooked up it would probably start 3rd pull or so)-$70 SOLD
rear fenders(very rough but they will work)-$15
frame(no breaks or rewelding no bends very good shape)-$25
rims(1 has tire goes flat about 3 days almost bald, other rims bead is bent up a little trying to get old tires off but can be straightedend)-$15 for one with tire,$10 for ones without tire or $25 for all
gas tank(petcock vlave is seized no cracks or breaks)-$15
oil tank(no cap no breaks)-$10
handle bars(no known bends brake cable is junk, grips are wore)-$10
drive shaft(casing and shaft together)-$10
forks(have a little twist to them, ive gone the whole time i rode it like that,springs are very good)-$10
air filter box (no breaks, great shape)-$10
carb(kinda rough, put appoxy on bottom becuse it oxidized holes in it)-$10 SOLD
seat(been completely re duct taped gray, put a seat cover over and it will be fine)-$10
exhaust pipe(good shape no holes)-$10
handle bar chin protector(good shape blue)-$10
misc parts(have almost 2 of all electrical parts, cables ect let me know what you need that i havent listed)
<!-- END CLTAGS --><TABLE summary="craigslist hosted images"><TBODY><TR><TD align=middle></TD><TD align=middle></TD></TR><TR><TD align=middle></TD><TD align=middle></TD></TR></TBODY></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
crazy96863
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
22
11-30-2012 11:12 PM
bigwin56f100
1948 - 1956 F1, F100 & Larger F-Series Trucks
27
01-22-2011 06:25 PM
SaikotikGunman
1987 - 1996 F150 & Larger F-Series Trucks
15
06-09-2009 10:56 AM