New FICM no start.
#1
New FICM no start.
My 03-6.0 wont start. Checked FICM, only geting 21v runing. No start at all on cool mornings but when 95 out it starts and ran rough till operating temp then all is good
Installed reman FICM from ford now no start and codes u0105 and u0306 are present.
I was told there was a 50/50 chance it would not run to drive to dealer to be flashed is this true????
Installed reman FICM from ford now no start and codes u0105 and u0306 are present.
I was told there was a 50/50 chance it would not run to drive to dealer to be flashed is this true????
#2
That's very true. If you installed a complete FICM from Ford there's a chance that it could still be programmed. Sounds like you got a blank one so you'll have to get it towed to a dealer OR contact Power Hungry Performance and have them send you a FICM programmer (best option IMHO) OR send them your FICM and let them flash it. Ford will have to have the FICM installed in your truck to flash it.
Thread
Thread Starter
Forum
Replies
Last Post