No power at CPS
#1
No power at CPS
I figured I should start a new thread about this. I read the other CPS post about replacement and broken parts.
1999 Ranger 3.0L CPS has no power. No codes Noid test reveals pulse to injectors and it has fuel pressure and spark. Checked all fuses and all are good. Fuel pump is priming. Any ideas? I read a post about reset of ECM. Removing the neg. cable for 10 minutes and will try that tomorrow. Thanks for your help.
1999 Ranger 3.0L CPS has no power. No codes Noid test reveals pulse to injectors and it has fuel pressure and spark. Checked all fuses and all are good. Fuel pump is priming. Any ideas? I read a post about reset of ECM. Removing the neg. cable for 10 minutes and will try that tomorrow. Thanks for your help.