F100: Will 1974 360/390 engine perches/stands work on a 1970 F100?

 

what are you doing exactly ?

 

Yes they will, the passenger side is same back to 65, drivers side was changed in 73 to accommodate the Saginaw power steering gear, it uses the other top hole.




John

 

I should clarify: 360/390 Block is a 73, the truck is a 70 F100, and the perches are 73-76. Will that combination work?

 

I should clarify: 360/390 Block is a 73, the truck is a 70 F100, and the perches are 73-76. Will that combination work?

 

heck yes !!

 

1969 F100/350's from serial number D96,001, all 1970/79 F100/250 2WD's, 1970/79 F350's and 1978/79 4WD's use essentially the same Ford P/S gearbox.

John says these were made by Saginaw. All I know is, Saginaw is a division of GM (Government Motors).

1966/68 F100/250 2WD's, 1969 F100/250 2WD's before serial number D96,001 used Bendix P/S. F350's were not available w/P/S until from D96,001.