Year: 1952
Make: Ford
Model: F-Series Pickup
Price: $1500
Mileage: 999999
Color: Light Blue
Private or Dealer Listing: Private Listing
Location (State): PA
Transmission: Manual
Drivetrain: Rear Wheel Drive
Color: Blue
Engine: 215 Inline 6 Cylinder

Quick history: This truck has been kept in a car port and a garage only a few yards away for it's entire life. It was a farm truck. I have owned it for about 15 years. Once in a while I try to fix it up, but something else always seem to come up and divert my attention before I do much at all. I haven't done any real restoration or tear downs.

It is light blue. It is the original paint and original rust on the right front fender, which was patched up with rivets at some point. There are specks of rust on some of the chrome. The grill is white painted. (Three "teeth") The rear fenders were removed in the early nineties and I can only find one. The bed has old rusty diamond plate and rust through on the lower side edges. The windows are all intact, but the right cigar window is cracked. All of the covering and padding has been removed from the bench seat, it is just springs on the frame. The ceiling and sides have had the lining removed. I got a spring for the glove box, but it is still hanging open. It's all dusty. The hood is not bolted on.

The 215 inline 6 cylinder turns over with the starter. There's a new 6 volt battery with 1000 some cca and it gets drained quickly doing the cranking. The carb has been rebuilt and seems to function well. No spark is reaching the plugs and I have not determined why. A new fuel pump and fuel pressure regulator were installed a few months ago. The brakes will not work. The brake fluid is dust and the brake shoes are in a box. All of the original stuff is there except that one rear fender. THere are a few parts and other things in a box for the truck, including the sho manual and two new brake cylinders.

I'll check the odometer for milage later, request if I forget.

Leave your email for photos.

 

i really need a bed for my 52 f2 if you are interested in parting it out. i cant buy another truck or i will probably be sleeping outside.

 

HAHAHHAHA I understand cot-rot. However, I'm not sure if the bed would be worth it for you unless you are good with welding and sheet metal. It's probably going to be parted out if no one here takes it... So I'll say yes, $500, but the labor and hauling is on you. Leave your e-mail for a photo.

 

please send picture,if you saw how bad the one i own is you would understand. i was wondering what the bottom half of the bed looks like. tlaneqb@aol.com thanks

 

where in Pa are you?

bob.murawski (at) yahoo(dot)com

 

norvillebob : About 10 minutes from the PA border of DE.

 

HI,

I need a factory 51/52 Rolled and channeled back bumper like in this picture:



Do yo have one? And if so would you be willing to sell it?

Thanks

 

I have a 52 F-6 and the front fenders are pretty bad. I know the f-2 through F-6 take the same fenders. what shape are your front fenders in and is the truck still available?

 

Picture page finally up for you folks:

Page 4 - Picture Site

 

Nobody would want the rest if I took off the front fenders

Oh, the first picture is old, but it has been n a garage the whole time since.

 

Any offers?

 

I should probably just pay one of you who know the '52 inside and out to just get it running - I'd bet it doesn't need much, and would run fine for a while... but the brakes.. hmm

 

on ebay in ny there is 3 1950 fords for sale in one sale. looks like one whole truck and two parts cabs.

 

please contact me at my email kencoffey4455@hotmail.com ill give you my phone # and we can talk

 

Blue do you still have the truck? I am looking for a project for my son and myself to work on. harleydbaloo@yahoo.com