Vent window

Reply Subscribe

Thread Tools

Search this Thread

01-22-2019, 08:30 PM

Broncor

Mountain Pass

Thread Starter

Join Date: Feb 2018

Location: DEWINTON Alberta

Posts: 192

Likes: 0

Received 1 Like on 1 Post

Vent window

Passanger vent window handle broke off almost flush to frame around window.
it is not a matter of a new handle, I have the handle but the actual shaft it goes onto is broke right off.
tried a round of JB weld but that has already failed.
From what I can see it looks like I have to find a whole new vent window frame and all.
Any other fixes or suggestions would be great and much appreciated.

Last edited by Broncor; 01-23-2019 at 07:59 AM. Reason: Spelling

Reply Like

01-22-2019, 10:48 PM

ZombieF150

Elder User

Join Date: Sep 2018

Location: NC

Posts: 735

Likes: 1

Received 8 Likes on 6 Posts

Maybe this might help? Looks like it might have all you need.

https://shop.broncograveyard.com/198...ctinfo/34304R/

Reply Like

01-23-2019, 12:28 AM

TexasGuy001

Hotshot

Join Date: Sep 2001

Posts: 11,920

Likes: 8

Received 205 Likes on 165 Posts

I believe the vent window has to be replaced. It would probably be easier to replace the whole assembly, but you could probably drill out the rivet and replace the window if you really wanted to.

Reply Like

01-23-2019, 06:09 AM

95fiveoh

Elder User

Join Date: Nov 2016

Location: Pittsburgh

Posts: 904

Likes: 0

Received 3 Likes on 3 Posts

The one on the drivers side of my truck was broken off when I got it. I replaced the entire vent window and frame. It cost something like $15 at a u-pull-it junkyard.

Reply Like