Good price for 6.0 need in complete overhaul
#1
04-21-2018, 11:11 AM
Join Date: Mar 2018
Location: Bethany,oklahoma
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
#2
04-21-2018, 01:07 PM
#5
04-21-2018, 08:47 PM
#6
04-21-2018, 09:14 PM
Join Date: Mar 2018
Location: Bethany,oklahoma
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
I am wanting to buy and sorry could of worded differently
I am wanting to buy one if it needs rebuilt that will be ok as I can teach my oldest some stuff bout em. Mileage 250000 max
I kno that they can crack the block an be mis diaged as a head gasket which does worry me. I found one for 500 as I work on these engines an truck 5-6 days a week but the thing is on it is a price and be the guy hydrolocked it he told me there is a lot of coolant in a cylinder. Again scary I was thinking bout a new as I would be spending roughly 5-7 grand on build with out the body as I can find them pretty cheap trans an transfer case I have put up in waterproof case so it is safe from weather an dust I have checked stuff locally and little luck
I kno that they can crack the block an be mis diaged as a head gasket which does worry me. I found one for 500 as I work on these engines an truck 5-6 days a week but the thing is on it is a price and be the guy hydrolocked it he told me there is a lot of coolant in a cylinder. Again scary I was thinking bout a new as I would be spending roughly 5-7 grand on build with out the body as I can find them pretty cheap trans an transfer case I have put up in waterproof case so it is safe from weather an dust I have checked stuff locally and little luck
#7
04-21-2018, 09:24 PM
Trending Topics
#8
04-21-2018, 10:55 PM
Join Date: Mar 2018
Location: Bethany,oklahoma
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
What state?
what state? As I will have to look into it in Oklahoma the 6.0 complete tucks and some part outs (11k for one with a dropped lifter as this is an example an I do understand y) are going kinda high I don't want something all pretty as I want to make it look and run like this just me I dont like buy-n a truck someone done aftermarket upgrades as I might not have same taste I will find one I sure miss mine I had
#9
04-22-2018, 06:24 AM
#10
04-22-2018, 03:26 PM
Join Date: Mar 2018
Location: Bethany,oklahoma
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
#12
04-22-2018, 09:18 PM
Join Date: Mar 2018
Location: Bethany,oklahoma
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
#13
04-23-2018, 05:50 AM
Mike, they are not going to refund Core charge on a cracked block. Don’t waste your time shipping it back. They do check them out pretty well. I had no problem getting my core charge back. It took a little over a week for them to check it out and give my refund. I did have a well scarred cylinder that was in tolerance tho.
#14
04-23-2018, 08:45 PM
Join Date: Mar 2018
Location: Bethany,oklahoma
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
#15
04-23-2018, 08:49 PM
what state? As I will have to look into it in Oklahoma the 6.0 complete tucks and some part outs (11k for one with a dropped lifter as this is an example an I do understand y) are going kinda high I don't want something all pretty as I want to make it look and run like this just me I dont like buy-n a truck someone done aftermarket upgrades as I might not have same taste I will find one I sure miss mine I had