1967 - 1972 F-100 & Larger F-Series Trucks Discuss the Bumpsides Ford Truck

parts interchangeable?

Thread Tools
 
Search this Thread
 
  #1  
Old 04-19-2018, 01:09 PM
Wilbilly's Avatar
Wilbilly
Wilbilly is offline
New User
Thread Starter
Join Date: Nov 2015
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
parts interchangeable?

Iv got a buddy that had a 69 f600 give to him. He is going to keep the bed and hoist and junk the rest. Im wondering how many parts will interchange with my 67 f350? If enough would i can trade him out of the hole truck. If not im sure i can cherry pick what will.
Thanks
 
  #2  
Old 04-19-2018, 01:57 PM
NumberDummy's Avatar
NumberDummy
NumberDummy is offline
Ford Parts Specialist

Join Date: Nov 2006
Location: Simi Valley, CA
Posts: 88,826
Received 648 Likes on 543 Posts
Originally Posted by Wilbilly
I've got a buddy that had a 69 F600 give to him. He is going to keep the bed and hoist and junk the rest.

I'm wondering how many parts will interchange with my 67 F350?
Almost none.
F600 is a HUGE 2 ton truck, all were sold as a cab & chassis (no 'back of cab' equipment), none came with or were available with a pickup bed.

The engine/transmission/rear axle/front/rear suspension is different as are the brakes and steering.

The hood is the same, but the fenders, grille and etc are not. '69 (1968/72) doors are different, because 1967 F100/750's have one year only doors. Most of the doors internal parts are also different.

More 1967 only: Dash, radio, heater, firewall, brake/clutch pedals, bracket they suspend from under the dash.

Ignition switch, instrument cluster backs, grilles, master cylinders, P/B boosters, brake pressure differential valves and low brake fluid warning lamp switch.
 
  #3  
Old 04-19-2018, 02:12 PM
Wilbilly's Avatar
Wilbilly
Wilbilly is offline
New User
Thread Starter
Join Date: Nov 2015
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Cab and door was what i was mosty wondering about.and any interior parts. It got the 331 in it i think so engine and everything elce is useless to me i know. I could get te hole truck for about what a good door would cost so it be worth it if anything much would work. Oh yeah he isnt sure what it is it could b a 500. Iv not seen it yet. frist time he told me about it he was saying it was like a 64/5 so i didnt think anything about it frist.
P.s. i didnt figure i could put a 16 ft grain box and hoist on f350 lol.
 
  #4  
Old 04-19-2018, 02:25 PM
NumberDummy's Avatar
NumberDummy
NumberDummy is offline
Ford Parts Specialist

Join Date: Nov 2006
Location: Simi Valley, CA
Posts: 88,826
Received 648 Likes on 543 Posts
Originally Posted by Wilbilly
Cab and door was what I was mostly wondering about, and any interior parts.

It's got the 330 in it I think, so engine and everything else is useless to me I know.

I could get the whole truck for about what a good door would cost, so it be worth it if anything much would work.

PS: I didn't figure I could but a 16 ft grain box and hoist on F350 lol
You can use 1968/72 F100/750 doors on your 1967. These doors have door lock *****, while on '67's, you push the inside handles forward to lock the doors.
 
  #5  
Old 04-19-2018, 02:30 PM
Wilbilly's Avatar
Wilbilly
Wilbilly is offline
New User
Thread Starter
Join Date: Nov 2015
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by NumberDummy
You can use 1968/72 F100/750 doors on your 1967. These doors have door lock *****, while on '67's, you push the inside handles forward to lock the doors.
That what i was thinking. I was hoping the cab was the same. Im not digging this one year only stuff really sence mine is still a working truck. ​​​​ .
 
  #6  
Old 04-19-2018, 05:07 PM
JEFFFAFA's Avatar
JEFFFAFA
JEFFFAFA is offline
Hotshot
Join Date: Mar 2013
Location: Phoenix, Az.
Posts: 14,194
Received 169 Likes on 149 Posts
Don't forget to grab the dash cluster out of it.
 
  #7  
Old 04-20-2018, 12:08 PM
MIKES 68 F100's Avatar
MIKES 68 F100
MIKES 68 F100 is offline
Logistics Pro
Join Date: Jan 2011
Location: Antelope Valley ,CA
Posts: 4,744
Received 21 Likes on 15 Posts
Originally Posted by JEFFFAFA
Don't forget to grab the dash cluster out of it.
+1 if you don't want it many people on here do
it's $$ in your pocket
 
  #8  
Old 04-20-2018, 12:31 PM
Wilbilly's Avatar
Wilbilly
Wilbilly is offline
New User
Thread Starter
Join Date: Nov 2015
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Im going to try to end up with it. Iv got an old 18ft Keweenaw disk he wants so probably do some trading. Iv just got to wait till he desides what he going to do. I think he not give up on fixing it yet
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ltharper
1967 - 1972 F-100 & Larger F-Series Trucks
21
01-12-2014 08:52 AM
my67Fordf100
1967 - 1972 F-100 & Larger F-Series Trucks
22
01-12-2013 09:04 PM
davbell22602
WTB - Parts & other
2
08-16-2010 06:12 PM
gersfeld1
1973 - 1979 F-100 & Larger F-Series Trucks
3
07-23-2010 02:42 PM
dumpy
1967 - 1972 F-100 & Larger F-Series Trucks
2
01-21-2009 07:41 AM



Quick Reply: parts interchangeable?



All times are GMT -5. The time now is 02:49 PM.