Remote start question
#3
#6
You cna download a copy of owner's manuals here...
https://owner.ford.com/tools/account...rd&model=F-150
See page 36 of your owner's manual for settings. It continues on page 37 on how to change the setting.
Also you might ask the questions for your truck over in the F-150 forums.
https://owner.ford.com/tools/account...rd&model=F-150
See page 36 of your owner's manual for settings. It continues on page 37 on how to change the setting.
Also you might ask the questions for your truck over in the F-150 forums.
#7
Trending Topics
#8
#9
Ya got it it working, good work! Some minor tweaks and your up and running, always nice if the info would be a little clearer, but sometimes I think the folks that write this stuff up, dont realize most owners are trying to do some of the features and not a tech at a dealer, as it is almost written to a tech's perspective.
#10
You probably should be asking your questions in the F150 forum....not here...there are probably differences in the IPC, BCM and other modules.
Since you are "playing" with values and FORScan....make this change and see if it increases your run time to 15 minutes
726-49-02-*3*3
BUT FOR SURE GO CHECK THE VARIOUS F150 forums on the internet about changes with FORScan.
Since you are "playing" with values and FORScan....make this change and see if it increases your run time to 15 minutes
726-49-02-*3*3
BUT FOR SURE GO CHECK THE VARIOUS F150 forums on the internet about changes with FORScan.
Thread
Thread Starter
Forum
Replies
Last Post
Remmons
2007 - 2014 Expedition & Navigator
1
11-04-2015 06:47 PM