I wanted to show off mine too
#1
I wanted to show off mine too
Sorry I didn't wash it first! XLT with value package (wanted to avoid chrome) 2 1/2 Ready Lift with Track arm bracket and caster bushings, Fuel rims and Toyo A/T's, Fab Fours front and rear bumper, Warn 16.5ti winch, Amp Research power running boards, Bushwhacker fender flares, Baja Designs OnX6 Hi power light bar and S2 as side projectors (about 28,000 lumens between the two), Rigid backup LEDs, Air Lift 5000 ultimate with HD compressor, Snugtop Xtra Vision with carpeted camper kit, Wet Okole seat covers with seat heaters, wheel well liners front and rear, ARE vent visors and a few bling items.
#2
Nice!!! Can you do me a favor and measure from the top of the extended AMP step to the truck where the SuperDuty baner is. I am considering buying the AMP but need to make sure it will work better that my fixed stock steps. I think I'm developing knee problems and never had them before I purchased my FX4. Thanks.
#3
Nice!!! Can you do me a favor and measure from the top of the extended AMP step to the truck where the SuperDuty baner is. I am considering buying the AMP but need to make sure it will work better that my fixed stock steps. I think I'm developing knee problems and never had them before I purchased my FX4. Thanks.
#7
Trending Topics
#8
#11
Crew Cab Part No: VHC3Z-99132A08-D MSRP $109
Reg or Supercab Part No: VHC3Z-99132A08-C MSRP $99
#13
Nice!!! Can you do me a favor and measure from the top of the extended AMP step to the truck where the SuperDuty baner is. I am considering buying the AMP but need to make sure it will work better that my fixed stock steps. I think I'm developing knee problems and never had them before I purchased my FX4. Thanks.
#14
Thank you so much. The stock set I have are about 9 1/4 so I think that the 3 1/2 inches might make a big difference.