Just had the ProComp 3.5" leveling kit installed... this is how the truck should have sat from the factory IMO...

I wanted to post pics in case anyone was curious about doing this to their truck. Also had ProComp Pro Runner shocks installed on all four corners to replace the Rancho shocks... what an incredible difference in smoothness!

 

good looking truck.

 

Here is the same lift on a long bed but with no blocks installed in the back. Sometimes it appears to be nose high but when you measure it sits dead level.

 

I have no idea how these pictures get flipped upside down .....

 

So you say it rides better than stock with this set up? Others have talked about bumpster after adding the leveling kits. Have you had any issues?

 

i could be wrong but the factory doesnt set them like that because they assume the vehicle will be hauling a bunch of weight and pulling a large trailer

 

Do you still like this leveling kit? How does it do towing? I have the exact truck as you except in a 350 and this is how I want to make my truck look.

 

You're not wrong

 

If your trac bar has been dropped with the lift, you will have no bump steer. Pro comp runners are good shocks but keep your receipt for warranty. They will leak yearly! I bought a set 3 years ago and just put on my second set of warranty replacements. The dealer gives me a new set every year when I bring in my old oil covered ones!

 

But now when you hook up to a load you will be blinding everyone with your lights at night.

 

I'd airbag the rear of a Superduty whether it was lifted or not.