Category: Steering & Suspension
Price: $0
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): Fit, S2000
Item Condition: CT
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck, Part suitable for diesel truck

I have an almost complete Dana 50 TTB front end that I'm parting out. All parts came off a 1995 F250. I have both axle beams and steering knuckles. The knuckles currently are still attached to the beams. I'm working on separating them (those lower BJ nuts are rusty SOBs).

I also have:

-2 spindles
-Driver's side axle shaft (both sections still connected, I can separate if you need just one section)
-Passenger side outer axle shaft (both sections still connected, I can separate if you need just one section). I do NOT have the passenger inner shaft that goes into the diff.
-2 brake calipers with brackets that are good rebuildable cores
-2 rotors/hub assemblies. The rotors are junk, but the hubs are good. I can separate them if you want. I do NOT have the manual locking hubs or spindle nuts.


Located in Guilford CT 06437. I can ship, and I accept Paypal. Let me know what you need, and I'll give you a price.

 

I separated the rotors from the hubs, and scrapped the rotors. The hubs are still available



I scrapped the calipers and brackets


Everything else is still available

 

I finally got the knuckles separated from the axle beams, and I removed the ball joints from the knuckles.

The driver's side knuckle has no studs for the spindle; you'll have to get new studs. The passenger side knuckle still has studs, but they're rusty and the threads might be a little damaged. I would recommend replacing them, or at the very least, use a thread chaser on them.

Everything is still available!

 

bump... I have one of the hubs listed on eBay right now
Ford Dana 50 60 Hub F250 F 250 F350 F 350 | eBay

I also have one of the spindles listed
http://www.ebay.com/itm/Ford-Dana-50-Spindle-F250-F-250-/191499385936?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1995%7CModel%3AF-250&hash=item2c9640bc50&vxp=mtr#ht_44wt_1362
Feel free to bid, or we can deal from this site. The auctions are for one hub and one spindle, but I have two of each available. I'll list the others on eBay as soon as these auctions end, if they don't sell here.

 

I just sold the axle shafts today. I also sold the other spindle, and one of the hubs.

So, to give a comprehensive list of things I still have, here they are. I still have:
-both knuckles
-both axle beams
-one hub

I have everything except the axle beams currently listed on eBay. Click one of the links above, and then click on "view seller's other items" to see the other auctions.

 

Both hubs are SOLD.
Passenger side knuckle is SOLD.

I still have for sale:
-driver side knuckle
-both axle beams

 

Driver side knuckle is SOLD. The only things left are the axle beams. I don't think I'm going to have much luck selling these, so I'll most likely take them to the scrapyard. But for now they're still for sale. I'll update this thread if/when I scrap or sell them.

 

I just brought the axle beams to the scrapyard this morning. I no longer have any Dana 50 parts for sale.