Category: Exterior - Body Parts
Price: $1
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): CRX & pre '92 Civic
Item Condition: CA
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck, Part suitable for diesel truck

I have a lot of 48-52 F1-F8 parts. I have trim, body panels, mechanical, emblems, etc. Did I mention that I have a lot? Please PM or email me with your wants.

I have running boards, tailgates, 48-50 F1 front fenders, 48-52 grilles, many trim pieces/emblems, mechanical parts, etc. I've been parting out trucks for several years and have accumilated a wealth of parts.

 

Dont know if you want to break anything up but I do need a single hood trim piece...Also what do you have as far as dash ***** go. Thanks for your time, newish to the site but working on getting a 48 f1 back on the road. Thanks again

 

Running boards and tailgates caught my eye. Currently working on a '51. Have been looking at repo parts on line but like the idea of reusing original if in got shape. Thanks

 

Email sent

PM sent

 

We are restoring a 52 F3. What do you have for body parts (fenders, bed(it has the 8ft express box))? Tailgate? We currently have a tailgate but i has a grain chute cut into the middle of the ford emblem

 

Have a nice 49 F1 tailgate?

Let me know.
Thanks Neal

 

PM sent

Email sent.

 

PanelMan, I am new to the forum. I have a 1950 F-3 truck. What I am looking for is a piece of sheet metal about 1 foot square. It goes under the drivers side fender behind the front wheel. It actually is screwed onto the bottom edge of the cab and goes between the inner fender and the bottom of the front fender. My truck is missing the one on the drivers side. It looks like it got ripped off in the past. Tinman? says he has never seen one. Maybe they were not put on F-1s and F-2s. I don't know. I have picture of the one on the other side of my truck but don't know how to put it on this message. Thanks, 41505379 patrickmuenks at ymail dot com

 

Do you mean the splash shield? Is it something like pictured below? They need to be turned sideways. This design is for 48-51. In 52, the design was slightly changed on one side. The end was more curved for one side (don't remember which side off the top of my head).




If that is the part, then I should have a pair.

 

yes, those are the splash guards I need. I did send you an email asking about your price. I really only need the drivers side but would be disappointed if I only bought that one and got the wrong one. Thanks, 41505379

 

Would you happen to have a battery box for a 48? That and one hood trim piece. Please email kylebonewitz@gmail.com at your convenience and ill keep thinking. Thanks

 

How about a pair of running boards for a 52 F1 shortbed?

 

How are you doing with your parts? I have a 1949 F-1

 

Everything is good. I still have a good inventory. What parts did you need?

 

49 F1 do you have any vent window frames? Thanks Randy