Ford Truck Enthusiasts Forums - View Single Post - Carb Jetting with Dual Fuel Setup
View Single Post
Old 07-25-2014, 04:46 PM
FrankGRUN FrankGRUN is offline
Junior User
Join Date: Jun 2010
Posts: 82
FrankGRUN is starting off with a positive reputation.
I'm mounting the 425 towards the rear of the engine right along the engine transmission axis, then a right angle air cleaner adapter pointing to the passenger side. I made up a cold air intake using components from the later EFI E350 models and bring a 4 inch brake duct tube (compatible with high temperatures) from an inline Spectre air filter to the right angle adapter. The vaporizer is mounted in the front of the engine compartment towards the passenger side to give access to the card adjustments and distributor. It all just fits under the doghouse, but mixer adjustments require removing the doghouse.The vaporizer is plumbed into the heater circuit with an inline thermostat.
Reply With Quote