Here's the other side of the block. Everything looks pretty much the same except the small hole directly above cylinder 2 (between it and 3) looks kinda clogged and the lower circle hole just under the square opening looks like it needs cleaned.



Here's the passenger side Head, fowler in plug 3, no plug in 1.




I think the oil is because I didn't drain the block before removing the heads it was on the block but I wiped it off before I took the pic.

Here's the Gasket



I'm still learning so if you see something I missed or if I'm thinking nothing is something please let me know

Edit: My brother said that oil shouldn't be there.