Ford Truck Enthusiasts Forums - Search Results

Notices
 
Search: Posts Made By: Conanski
Showing results 1 to 15 of 500
Search took 0.55 seconds.
Yesterday, 10:58 PM
Replies: 7
Views: 142
Posted By Conanski

It could work but you need the big block trans...

It could work but you need the big block trans too as that motor won't bolt up to the one behind the 5.8, also need the 7.5 PCM.
Yesterday, 01:36 PM
Replies: 4
Views: 139
Posted By Conanski

Do you tow at all? The I6 makes 150hp and yes it...

Do you tow at all? The I6 makes 150hp and yes it can tow but you will be going back in time to the '70s when large vehicles were always in the way. A V10 van may be better suited.
03-17-2019, 02:04 PM
Replies: 2
Views: 73
Posted By Conanski

Yeah you got the 10th digit wrong, should be an R...

Yeah you got the 10th digit wrong, should be an R not and E
1FTHF26H6ENB62886
03-17-2019, 12:03 PM
Replies: 2
Views: 163
Posted By Conanski

Sounds like an issue I have seen with AWD Subarus...

Sounds like an issue I have seen with AWD Subarus when the center differential dries out, a good driveline shop should be able to sort this out. How many miles on this truck?
03-17-2019, 11:36 AM
Replies: 2
Views: 133
Posted By Conanski

There are 2 different types of TFI modules for...

There are 2 different types of TFI modules for these trucks with different signals used and two different formats for each.. a remote mount and distributor mount version. So my question is what...
03-16-2019, 05:28 PM
Replies: 16
Views: 326
Posted By Conanski

The cluster you want from a '92-94 will look like...

The cluster you want from a '92-94 will look like this, and you can swap out the speedo section and keep your ODO reading.

...
03-16-2019, 04:54 PM
Replies: 25
Views: 510
Posted By Conanski

Yeah that is still low which means a weak fuel...

Yeah that is still low which means a weak fuel pump.
03-14-2019, 07:10 PM
Replies: 10
Views: 15,859
Posted By Conanski

The basic motor never changed so you could make...

The basic motor never changed so you could make any year work but to minimize the number of changes you have to make I think you want a 2k+ motor as the intake and other parts like the ignition...
03-14-2019, 10:46 AM
Replies: 13
Views: 380
Posted By Conanski

16" is definitely an option and you could go up...

16" is definitely an option and you could go up to 8" in width, stock rims on a 1/2 ton van is likely 7", check the decal on the driver door pillar the factory tire and ewheel sizes are usually...
03-14-2019, 10:29 AM
Replies: 36
Views: 1,360
Posted By Conanski

Better not or you have another problem.There are...

Better not or you have another problem.There are no valves inline with the send or return lines on a '92 both tanks are just T'd into them, check valves are inside the FDM inside each tank and are...
03-13-2019, 10:01 PM
Replies: 6
Views: 177
Posted By Conanski

That is a beefy spring pack and it doesn't look...

That is a beefy spring pack and it doesn't look like it has been modified, you could pull a leaf(or 2) out of it but that still won't make it ride like a Lincoln. I agree with checking tire air...
Replies: 15
Views: 441
Posted By Conanski

50mph in 4th is the same 2000rpm correct? If so...

50mph in 4th is the same 2000rpm correct? If so that is too low you need to be in 3rd gear. This is a great example of why the 5.0 trucks should have all come with 4.10 gears, this motor makes no...
03-13-2019, 07:50 PM
Replies: 14
Views: 599
Posted By Conanski

Good work, If you multiply those numbers by...

Good work, If you multiply those numbers by 25%(typical E4OD loses.. it's a pig) you get 347tq and 213hp at the crank which is pretty much exactly the factory rating.
03-13-2019, 07:45 PM
Replies: 14
Views: 599
Posted By Conanski

And that is a very small gain for the amount of...

And that is a very small gain for the amount of money it would cost, an all stock motor with just a cam change produces much bigger gains but Edelbrock doesn't make an SD EFI friendly cam and even if...
Replies: 4
Views: 250
Posted By Conanski

An AOD should be rebuilt with all the updates and...

An AOD should be rebuilt with all the updates and have a shift kit installed, that done it will last a long time even if it gets flogged like mine was.
Showing results 1 to 15 of 500
 


 
Forum Jump

Contact Us About Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.