Ford Truck Enthusiasts Forums - Search Results

Notices
 
Search: Posts Made By: fordman75
Showing results 1 to 15 of 497
Search took 0.42 seconds.
Today, 04:00 PM
Replies: 24
Views: 671
Posted By fordman75

You just disassemble them pull all the guts out...

You just disassemble them pull all the guts out and mask of the inside of the housings. Then paint the outside of the housings. Once it's dry reassemble and all is good.
Yesterday, 03:00 PM
Replies: 25
Views: 874
Posted By fordman75

You can use the 240 rods with a 300 crank. But it...

You can use the 240 rods with a 300 crank. But it requires some custom pistons that have a much shorter compression height. Like Pmuller mentioned earlier.
02-16-2019, 10:02 PM
Replies: 3
Views: 187
Posted By fordman75

What age is the 300? The 240 carb may be...

What age is the 300?

The 240 carb may be smaller then a 300 carb too. It may be restricting things.

Confirm the timing mark on the dampner is correct. The outer rings are known to spin causing...
02-16-2019, 09:41 PM
Replies: 24
Views: 671
Posted By fordman75

I've always been been partial to the Old Ford...

I've always been been partial to the Old Ford blue with black accessories.
02-16-2019, 09:36 PM
Replies: 25
Views: 874
Posted By fordman75

Your compression will likely be too high for pump...

Your compression will likely be too high for pump gas.
02-14-2019, 11:02 PM
Replies: 49
Views: 2,785
Posted By fordman75

I use a similar trick when I'm working on my...

I use a similar trick when I'm working on my headers. I use a smaller version of that flexible ducting to lay out the primary tubes for my headers. It's nice because you can lay out the tube shape...
02-14-2019, 06:55 PM
Replies: 92
Views: 7,469
Posted By fordman75

I've pulled many engines out of a whole variety...

I've pulled many engines out of a whole variety of vehicles. I've had a few different issues while using engine hoist. I've had them tip over sideways. I've had them tip forward, dumping the engine...
02-14-2019, 12:35 PM
Replies: 16
Views: 898
Posted By fordman75

You sure it's a positive ground?

You sure it's a positive ground?
02-12-2019, 02:34 PM
Replies: 49
Views: 2,785
Posted By fordman75

It's looking good! It's coming together nicely....

It's looking good! It's coming together nicely. That valve cover looks really nice.


I think AB is right. I think that's just a casting line in the tailshaft housing. The ones I had that cracked,...
Replies: 234
Views: 9,003
Posted By fordman75

Yep more snow here to tomorrow/Tuesday, Then more...

Yep more snow here to tomorrow/Tuesday, Then more on Thursday. Seems like we're in a little storm train. Every other day or so more snow.
Replies: 234
Views: 9,003
Posted By fordman75

Must be nice!! I look out my window as more snow...

Must be nice!! I look out my window as more snow falls.:-roll. :-X04



Your engine is looking good!
02-08-2019, 02:28 PM
Replies: 35
Views: 2,246
Posted By fordman75

Plus you have to deal with all the legal crap too...

Plus you have to deal with all the legal crap too when doing the body swap. You are basically changing the VIN #. So you no longer would have matching #'s on the body and frame. Which could also turn...
02-07-2019, 01:35 AM
Replies: 49
Views: 2,785
Posted By fordman75

The ARP bolt set I use is the 150-2201 they have...

The ARP bolt set I use is the 150-2201 they have the 1/2" bolt heads.

But yes you don't want uneven heights on the diaphragm fingers. They may even out after being ran for a little bit but better...
02-06-2019, 11:50 PM
Replies: 49
Views: 2,785
Posted By fordman75

What size are the heads of those bolts? I usually...

What size are the heads of those bolts? I usually run ARP pressure plate bolts and I think they have a 1/2" head on them.

A few years back I bought a $400 Zoom clutch set from summit racing. When...
02-06-2019, 03:08 PM
Replies: 9
Views: 352
Posted By fordman75

Yep 9M is white.

Yep 9M is white.
Showing results 1 to 15 of 497
 


 
Forum Jump

Contact Us About Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.