Ford Truck Enthusiasts Forums - Search Results

Notices
 
Search: Posts Made By: rogerf100
Showing results 1 to 15 of 477
Search took 1.32 seconds.
Forum: Crossovers
12-30-2013, 08:33 AM
Replies: 2
Views: 949
Posted By rogerf100

This happened on our 2005 Freestyle. Problem was...

This happened on our 2005 Freestyle. Problem was solved by removing and cleaning the throttle body.
12-26-2013, 04:49 PM
Replies: 69
Views: 77,913
Posted By rogerf100

Update

Did some more digging into posts and found this one https://www.ford-trucks.com/forums/1077203-plug-wires-and-crossfire.html with a tip to take the #8 plug wire out of the loom to eliminate...
12-26-2013, 03:26 PM
Replies: 69
Views: 77,913
Posted By rogerf100

I finally got some time off and good weather at...

I finally got some time off and good weather at the same time. So today I replaced everything from the spark plugs to the distributor and coil. As I stated in a previous post new distributor. All...
12-05-2013, 10:12 PM
Replies: 69
Views: 77,913
Posted By rogerf100

I have been experiencing the same shudder between...

I have been experiencing the same shudder between 45-50 mph on my 1994 F150 with 5.0 V8 and 4R70W trans. This started soon after I replaced the distributor due to a bad PIP sensor causing a no...
11-06-2013, 09:04 PM
Replies: 22
Views: 1,843
Posted By rogerf100

I replaced the distributor last Saturday. Got...

I replaced the distributor last Saturday. Got the timing adjusted and the truck is running great. Time will tell if the problem is fixed. The distributor I installed is a new not rebuilt unit from...
10-19-2013, 12:10 PM
Replies: 22
Views: 1,843
Posted By rogerf100

Still have the problem but with cooler temps it...

Still have the problem but with cooler temps it is less frequent. I have been carrying a remote starter switch and an Led test light. When the problem happens I connect the test light and remote...
09-27-2013, 02:39 PM
Replies: 22
Views: 1,843
Posted By rogerf100

I got tired of trying to catch the problem with...

I got tired of trying to catch the problem with the test light so I replaced the ICM to start with yesterday. I figure I have a 50/50 chance of it being the ICM or the Pip sensor on the dist. The...
09-20-2013, 07:38 AM
Replies: 22
Views: 1,843
Posted By rogerf100

Two days in a row I haved stopped on my way to...

Two days in a row I haved stopped on my way to work and the truck would not start. So I thought finally I will be able to trouble shoot the problem and narrow it down to a part. I popped the hood...
09-14-2013, 05:46 PM
Replies: 22
Views: 1,843
Posted By rogerf100

I tried testing the truck today but it would not...

I tried testing the truck today but it would not give the problem:-arrgh. I drove it around until it was up to normal temp and parked it in the driveway. I removed the coil wire from the dist cap...
09-13-2013, 05:45 PM
Replies: 22
Views: 1,843
Posted By rogerf100

I am going to work on it this weekend following...

I am going to work on it this weekend following the trouble shooting procedure on the link I provided.
.
09-09-2013, 05:28 PM
Replies: 22
Views: 1,843
Posted By rogerf100

I was getting the 111 code. Just no codes for...

I was getting the 111 code. Just no codes for any sensors. Then the last time I checked I finally got a code for the PIP sensor.
09-08-2013, 07:28 PM
Replies: 100
Views: 3,495
Posted By rogerf100

I had a great time pounding on the frame out...

I had a great time pounding on the frame out back. Nice to meet some fellow Ford truck enthusiasts. Gary, you have a great shop/garage. It's very nice of you to share it. Look forward to the next...
09-08-2013, 01:24 PM
Replies: 22
Views: 1,843
Posted By rogerf100

Found a link to a good test procedure for the...

Found a link to a good test procedure for the ignition system Part 2 -Ford Ignition Module Test. Distributor Mounted Module (ICM)....
08-19-2013, 04:15 PM
Replies: 22
Views: 1,843
Posted By rogerf100

Changed the FPR since it was below normal with...

Changed the FPR since it was below normal with the key on engine off. Now pressure is 31 lbs with key on engine off and 32 lbs at idle. 42 lbs when revved. Took it out for a test run and still...
08-15-2013, 07:47 AM
Replies: 22
Views: 1,843
Posted By rogerf100

Thank you for the info. I will check the FPR...

Thank you for the info. I will check the FPR first. If that is not the source then I will check the PIP sensor for the dist.
Showing results 1 to 15 of 477
 


 
Forum Jump

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.