MANY 73-79 parts-PARTING OUT 2 TRUCKS
Tons of 73-79 parts available.Im thinning down the collection to make a little room for my current project.
Im currently parting out 2 4wd F-250s (a '78 4speed,and 79 auto),but have parts for most trucks. Lots of good parts available.Reasonably priced. Wiring Steering columns driveshafts Pace Truck front seat Pace Truck door panels Dana 44 front and 60 rear w/4.10s(8 lug) Running 351m Lots of 351M parts 460 engine and parts DOVE heads 351C 4V closed chamber heads(1970) NP435 C6 NP205s NICE 78-79 F-250/F-350 4wd frame F-250 steering boxes(highboy conversion parts) Doors Fenders Inner fenders Splash sheilds Trim Grilles and grille parts A/C parts More,more,more.....way too much to list Pm or respond here with what you need and your location,and I will get you a price with shipping. |
Hey i am looking for a rear wiring harness that coonect all the lights to the back of the truck.And i am looking for a yoke that comes off the transfer case.The yoke i need is the front one that coonect the front drive shat to the front axle.These parts must fit a 1978 ford f250 351m 4x4 4speed.
|
Hi,
I have a 73 f250 hiboy 4x4; I could use spare tire hanger/apparatus and associated hardware if you have it. |
What steering columns do you have? Any manual/tilt columns?
|
could i just get the 460 block?
if so how much would you sell it for? and do you have a reciever hitch for a 78 f250 4x4? |
Originally Posted by blacklabel21
(Post 9220593)
Hey i am looking for a rear wiring harness that coonect all the lights to the back of the truck.And i am looking for a yoke that comes off the transfer case.The yoke i need is the front one that coonect the front drive shat to the front axle.These parts must fit a 1978 ford f250 351m 4x4 4speed.
|
97 nuke-As a matter of fact,I do have a 4 speed tilt column!Its the only one I have have ever had(or seen),and I'm not dying to part with it,but cash talks.
Anti Hero-I'll take $200 for the 460,either as a complete shortblock,or I'll pull all the internals and do a bare block for the same price...since the internals would be useless to me without the block. |
RiverRouge-I dont have the spare tire hanger that you need,sorry.
|
IN NEED OF A NP 205 DIVORCED!!!
WAS WONDERING IF YOU HAD A NP 205 DIVORCED COMPLETE WITH YOKES? AND IF SO HOW MUCH WITH SHIPPING TO PA?
THANKS |
Hi Thanks anyway. Good luck with sale...
John |
AC parts from the firewall forward?
|
Grille shell and inserts, and headlight buckets?
|
Bumper brackets for contour style, not step?
|
F150 parts needed
upper side beltline trim both sides (long bed) lower trim drivers side Seat belts all (tan interior) Cruise control (complete) if you don't have all of it really need to engine parts of it. tailgate aluminum FORD trim sending units both tanks (front and rear) Need bolts to attach tailgate. Tail gate is on but the truck used to have a camper on and the bolts are no longer there. Duraspark 2 module (blue) both mirrors steering wheel aluminum trim that goes around right rear passenger tail light. left vent glass (if it closes all the way and locks. (mine doesn't) Shipping to 75077 Thanks, Mark |
hi do you have a 76 150 4x4 tilt auto colum
|
All times are GMT -5. The time now is 10:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands