my old projects
 

here they are.. 85 bronco and 93 F150 Shortbed.. i'll start with the bronco, since i had that first..

85 Bronco, factory 4.9/C6. Motor was replaced with a worked 302 after the I6 blew up. it had coil springs out of an E250 and leafs out of an F250, giving it (roughly) a 4" lift. it had 35x12.50 Dunlop Mud Rovers on it for a little while, until i traded them for a set of 38x12.50 TSL's.

http://i28.photobucket.com/albums/c2...65f1fda279.jpg
http://i28.photobucket.com/albums/c2...7b8e63561c.jpg
http://i28.photobucket.com/albums/c2...7e9fea4ac3.jpg
http://i28.photobucket.com/albums/c2...5f52d80edb.jpg
http://i28.photobucket.com/albums/c2...6e6242631f.jpg
http://i28.photobucket.com/albums/c2...a43e45ea72.jpg
http://i28.photobucket.com/albums/c2...1238e3ecb0.jpg
http://i28.photobucket.com/albums/c2...16b13fa51f.jpg
http://i28.photobucket.com/albums/c2...8634b201b9.jpg



93 F150, factory 2wd truck, was converted with all 83 F150 IFS junk and a skyjacker 6" lift and 3" body lift. frame was cracked where the radius arm brackets bolted up, so i flattened it all out about welded a 3/16" plate onto the frame. the final touch was some fresh paint and 39.5x15 TSL's

http://i28.photobucket.com/albums/c2...bced7c4fcf.jpg
http://i28.photobucket.com/albums/c2...Y/000_0004.jpg
http://i28.photobucket.com/albums/c2...000_0003-1.jpg
http://i28.photobucket.com/albums/c2...000_0002-2.jpg
http://i28.photobucket.com/albums/c2...Y/000_0003.jpg
http://i28.photobucket.com/albums/c2...000_0002-1.jpg
http://i28.photobucket.com/albums/c2...LY/000_002.jpg
http://i28.photobucket.com/albums/c2...Y/000_0002.jpg

Nice trucks, so if they are old projects, does that mean you have sold them?

lets just say unwillingly gone.. and i'll leave it at that.. lol sore subject