1957-1963 Master Parts Catalog - 3 volume set
 

These three catalogs total approximately 3,000 pages (when stacked, they total nearly 5" thick!) and were used by Ford parts counter personnel and repair technicians. These catalogs include every part number used on Ford light and heavy duty trucks & vans built between 1957 and 1963 with full-exploded views and illustrations of these trucks, which provides a great aid to anyone restoring, repairing or simply maintaining these vintage trucks/vans. These catalogs will allow you to KNOW what are the correct parts and their part numbers for these trucks / vans.

These catalogs cover all 2wd and 4wd (4x4) models including illustrations and part numbers for seats, material descriptions, floor coverings, drum and air brake systems, suspension, axles, electrical, steering, clutch & flywheel, radiator cooling, sheet metal, exhaust & muffler, body molding, interior and exterior trim, fuel lines, intakes, Autolite, Rochester and Holley carburetor part numbers, hood, leaf and coil springs, drive shaft dimensions, manual transmissions, COM, C4, C6 automatic transmissions, size and dimensions of wheels, 6 and 8 Cylinder gas engines and all available diesel engines and more. This set includes all the illustrations, parts and optional equipment that was offered by Ford for the popular '61-'63 Unibody Pickup trucks.
Don't be guessing from poor photocopied or scanned pages, here is your chance for a copy of the REAL MCCOY FoMoCo-issued catalogs!

I'm asking 85 dollars plus shipping costs for all three catalogs.
These catalogs will be shipped from zipcode 48888.
BarnieTrk

What is the condition of these three catalogs?

Can you post a pic?

I have a 1963 Styleside F-100 and need the diagram of the clutch assembly.

hefnerhef

BarnieTrk
Do you still have the catalogs?

hefnerhef -- Sorry I didn't get back to ya sooner. I've been on the road......

Yes, I still have the catalogs. You should buy them. :-D

Other than a slight yellowing of the paper (as expected, considering their age), the catalogs are in great shape. No missing pages & no pages are torn badly. :-X22

No, I don't have any way to scan pages & post them. :'(

BarnieTrk :-X21

BarnieTrk,

I will offer you $50.00 plus shipping.

hefnerhef.

Catalogs
 

BarnieTrk,

Are you there? Are you interested in selling the catalogs for $50.00?

hefnerhef.

Hefnerhef,
I'm sorry - I tried to send you a private message last week, but apparently your account wouldn't accept it, so it didn't go through. I should have checked my "sent mail" to ensure it went through, but I didn't do that.

Sure, I'll sell you the set of three catalogs for $50 plus shipping.

Please send to my email (wrdavid1969@hotmail.com) your US mailing address (not a P.O. Box) including zipcode so I can determine a shipping cost (probably would go USPS). Then I'll get back with you with the total cost amount.
I'd prefer payment to be by postal money order, rather than a personal check. I'd have to wait three weeks for a personal check to clear before I could send you the catalogs, with a postal money order no wait would be necessary.

Meantime, I'll find a box and get the package weighed.
My zipcode is 48888.

BarnieTrk

Are the books sold?

Yep. The catalogs are/were sold. Hefnerhef bought them. Sorry for your loss...... :(

Figured they were, had to ask. For some reason the post showed up at the top of the "classifieds" yesterday.

What's your phone number so we can make payment arrangements?
Thanks,
pablo-ipucha@hotmail.com