1963 Unibody decode please
 

Just bought this truck for $400. Needs a battery and a radiator. Here's the tag info.

Vin: F10JK360002
W.B. 122
Color B
Model F100
Body 66B
Trans A
Axle 13
GVW 5000
HP. 114@3600
DSO 51

Thanks for the help. I'llget pics soon.

F10 = F100 2WD

J = 223 1V I-6.

K = Kansas City MO Assembly Plant.

360002 = 1963, assembled December 1962.

122" Wheelbase.

B = Caribbean Turquoise.

F100 2WD, 5,000 lbs. GVWR

66B = Unit Body Pickup-Custom Cab.

A = Ford Type 3.03 3 Speed Manual all Syncromesh Transmission.

13 = Ford 9" Rear Axle / 4.11-1 / non Limited Slip / 3,300 lb. Rear Axle Capacity.

5,000 lbs. Gross Vehicle Weight Rating.

114 net HP @ 3,600 RPM

51 = Denver CO Ford District Sales Office, where the original selling dealer ordered the truck from.

I can't get the pics to load up but the truck is a big back window that is pretty strait, running driving truck. Is there anything that says its a big back window. I know it wasn't added but I never have owned any of these trucks older than 65. First unibody ever for me.

No there is nothing other than the custom cab designation. It had to be CC to get the big window and not all custom cabs have it.

Garbz

For 400 clams and straight...if its relatively rust free...I would say thats a good deal...from what Ive seen of the integral bodied pickups, their primary rust area is the front of the bed/rear of the cab and the area on the sides where that panel is welded to the side of the truck.
Either way though a big back window truck is a big back window truck...a hard thing to walk away from...a few years ago I saw 2 at a local yard that came in together...super super clean, straight and rust free trucks...mostly complete too...unfortunate for me they had both already been sold :( Havent seen them since...


- cs65

It has rust in the floors under the floor vents and in the door steps. The bed is clean as is the back cab area. Pics to come soon.

Here are some pics. Login | Facebook
Login | Facebook
Login | Facebook

Nice truck Ross Hart!