need help/ cruise control recall problem pics included SOLVED 4/18 10am thx Doc
 

Just had the CC recall done yesterday and last night the cruise doesn't work. I am thinking the tech forgot to connect this connector but want to make sure. The back doesn't allow me to get up in there to see what the port looks like and I not sure just guessing the tech didn't finish the job. Could someone look and just verify that these two go together, Thanks

You cannot catch a break lately Tom

I can't but if its as simple as just them not connecting these then I can handle. Just want to make sure with the recall they ARE suppose to be connected. New connector, old receptor.........

Went out and looked at mine Tom. Thats the right plug to the switch, brown with blue tape on the harness.

I have not had the recall done yet myself so I am not sure what that is all supposed to look like Tom. That is on the drivers side correct?

You want me to run over and climb in there Tom

Thanks for looking, I just wanted to make sure they were suppose to be connected AFTER the recall. Reps sent.

Jay thanks for the offer to come over. I can reach them just didn't know if they were suppose to be connected AFTER the recall or not and of course I couldn't see the receptor to see if was the right one. Appreciate the offer. Heading to ND tomorrow and having cruise would be a good thing........

That would be a tough drive without cruise lol Enjoy your trip. Going up to see your friend?

Yes I am, need a change of scenery for a couple days and yes that trip would be a tough one without cruise.

Anytime, glad I could help.

Tom are you talking about the switch at the master?