Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks (https://www.ford-trucks.com/forums/forum37/)
-   -   85 Ford F250 Tailgate Trim. Where to get! (https://www.ford-trucks.com/forums/944805-85-ford-f250-tailgate-trim-where-to-get.html)

The Garage Gourmet 03-31-2010 07:33 PM

85 Ford F250 Tailgate Trim. Where to get!
 
Hi Guys I've got the cleanest 85 F250 you'll probably ever see that i just inherited. (6.9 diesel) . The only problem is the rear tailgate trim has got a few dents and the reflector is busted. I'm wondering if anyone out there knows of one. The 1985 one has the ribbed reflector lens. (i guess most of you guys know that) sorry. I didn't but then again i'm a new GM convert. Thanks in advance for any help!!

Rogue_Wulff 03-31-2010 11:18 PM

Those are starting to become pretty rare finds. I know a guy who bought a complete truck, just because it had a good tailgate piece.
I don't know if any of the reproduction parts suppliers sell them or not.

LARIAT 85 04-01-2010 08:19 PM

Those particular aluminum finish panels are obsolete from Ford, and NO reproduction parts suppliers sells the 1985 - 1986 version. Trust me, I have checked EVERYWHERE.

The 1980 - 1984 are reproduced, and so are the 1987 - 1991 and the 1992 - 1996 panels. For some reason, the 1985 - 1986 version is just forgotten. And in my opinion, those are best looking ones ever made. Dennis Carpenter Reproductions have been "promising" these since 2004, and they still don't have any.

The only place I know of would be Ebay. I have seen some pretty good ones come up from time to time.

If your clean 1985 F250 is a "Lariat" and has the optional upper black/chrome/black adhesive moulding that starts below the front side marker light and runs the length of the truck like mine does, TAKE VERY GOOD CARE OF IT, because that is not available either...ANYWHERE. The 1980 - 1984 trim moulding, as well as the 1987 - 1991 and the 1992 - 1996 is reproduced, but once again, the 1985 - 1986 upper moulding is forgotten about.

Archion 04-01-2010 08:30 PM

It is made from unobtainium. Very rare and very expensive. There was ONE at carlisle last year, it was attached to a VERY beat up tailgate and still went for 250. I was able to repair my reflector, just eh backing was messed up. I just need two of the letters, O and D. So for it is proving an impossible task.

Chitownhillbilly 04-01-2010 09:04 PM


Originally Posted by LARIAT 85 (Post 8716097)
Those particular aluminum finish panels are obsolete from Ford, and NO reproduction parts suppliers sells the 1985 - 1986 version. Trust me, I have checked EVERYWHERE.

The 1980 - 1984 are reproduced, and so are the 1987 - 1991 and the 1992 - 1996 panels. For some reason, the 1985 - 1986 version is just forgotten. And in my opinion, those are best looking ones ever made. Dennis Carpenter Reproductions have been "promising" these since 2004, and they still don't have any.

The only place I know of would be Ebay. I have seen some pretty good ones come up from time to time.

If your clean 1985 F250 is a "Lariat" and has the optional upper black/chrome/black adhesive moulding that starts below the front side marker light and runs the length of the truck like mine does, TAKE VERY GOOD CARE OF IT, because that is not available either...ANYWHERE. The 1980 - 1984 trim moulding, as well as the 1987 - 1991 and the 1992 - 1996 is reproduced, but once again, the 1985 - 1986 upper moulding is forgotten about.

Possibly the worst F'in news I've seen in a long time...

I need the Tailgate piece and some chunks of the Upper trim! Actually I just need the Reflector on the Tailgate, the aluminum is in good shape.

Coneynew 04-21-2010 11:56 AM

I have (3) of these. One already on a mint condition 85 Tailgate, 1 nice one I was able to salvage from the yard (they are dam near impossible to find as you found out) and one basicaly new one that recd. dmage at some point, so I may be able to get the pieces off of it you could use. I'll check tonight.

Chitownhillbilly 04-21-2010 12:32 PM


Originally Posted by LARIAT 85 (Post 8716097)

The 1980 - 1984 are reproduced, and so are the 1987 - 1991 and the 1992 - 1996 panels. For some reason, the 1985 - 1986 version is just forgotten.

Does anyone know if the panels are interchangeable? Do they all mount the same? Can I take the panel from a 1987 or a 1992 and put it on my 1986? I know it won't be period correct but I need to cover up those wholes somehow and I can find the other pieces at a decent price.

oldfordtrucksrule 04-25-2010 11:02 AM

hey if you r quick theres 1 goin off ebay in a few hours, auction # 190390195993 its off an 86 f150... no bids yet but im sure it will sell...

Chitownhillbilly 04-25-2010 12:15 PM


Originally Posted by oldfordtrucksrule (Post 8812438)
hey if you r quick theres 1 goin off ebay in a few hours, auction # 190390195993 its off an 86 f150... no bids yet but im sure it will sell...


Wow... only 20 min away from me.

texaskid22 04-25-2010 12:24 PM

wow that is a very nice one on ebay.

I found this one locally... but the guy wants a lot more than I'm currently willing to pay. 80-86 Aluminum tailgate trim
80-86 :-X24

Chitownhillbilly 04-25-2010 07:26 PM


Originally Posted by oldfordtrucksrule (Post 8812438)
hey if you r quick theres 1 goin off ebay in a few hours, auction # 190390195993 its off an 86 f150... no bids yet but im sure it will sell...


Originally Posted by texaskid22 (Post 8812696)
wow that is a very nice one on ebay.

I found this one locally... but the guy wants a lot more than I'm currently willing to pay. 80-86 Aluminum tailgate trim
80-86 :-X24


Well Texas your's is looking like a buy. Ebay ad is over $250!!

Festus Hagen 04-25-2010 08:35 PM


Originally Posted by oldfordtrucksrule (Post 8812438)
hey if you r quick theres 1 goin off ebay in a few hours, auction # 190390195993 its off an 86 f150... no bids yet but im sure it will sell...

It ended at $280

-Enjoy
fh : )_~

CadillacsCowgirl 09-25-2011 09:38 PM

I know this post is a little old (ok, a lot old), but, I have one off my 86 Ford F250 I just sold. No dents, dings, or gouges, reflector is not broken, tabs on the back are not busted... just a little chrome rubbed off the Ford part of it. I was going to put it up on eBay but would rather not deal with the hassel. You can email me at cadillacs.cowgirl@yahoo.com

CadillacsCowgirl 09-25-2011 09:47 PM

See post above...

Josh Howard 12-12-2013 11:06 AM

I have one!
 
I have one of these trim panels if anyone is interested contact me.


All times are GMT -5. The time now is 03:30 PM.


© 2024 MH Sub I, LLC dba Internet Brands