Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   1948 - 1956 F1, F100 & Larger F-Series Trucks (https://www.ford-trucks.com/forums/forum41/)
-   -   Timken 2-speed axle - ever seen one ?? (https://www.ford-trucks.com/forums/922213-timken-2-speed-axle-ever-seen-one.html)

38 coupe 01-26-2012 06:05 PM

The 2-speed axle under the 30s and 40s Fords was the Columbia, not the Ruckstell.

A picture of the Ruckstell can be seen in this thread: Model T Ford Forum: Ruckstell or auxiliary transmission, opinions wanted.

The Columbia axle was available from 34 to 48 for new Fords. A picture of a Columbia can be seen here: Redirect Notice

NumberDummy 01-27-2012 07:02 AM

Columbia Two Speed: Company owned by Erret Lobban Cord (who also owned TWA-Transcontinental & Western Air, Lycoming, and ACD-Auburn/Cord/Duesenberg). AFAIK, first installed in 1935 Auburn 851's.

The only Ford products I've seen (vacuum controlled) Columbia two speeds installed in: 1941/48 Ford/Mercury Passenger Cars. I had a '47 Ford woody with one, a pal has several '46/48 Fords and Merc's w/Columbia's.

Maddux Inc., the CA Lincoln Distributor, founded TAT-Transcontinenental Air Transport in the 1920's, merged it with Western Air Express. The aircraft were Ford Tri-Motors initially.

Cord bought TWA when Maddux went bankrupt, then with his fortunes declining, sold it to Howard Hughes. Hughes later changed the name to Trans World Airlines.

furius 11-30-2012 11:29 PM

if i didn't live so far away i would take you up on that rear axle. that front axle is nice but i wouldn't have a use for it. :-X06 plus i am half snowed in already all projects around hear stop when it snows. i have enjoyed this thread i know its early but merry christmas

NumberDummy 12-01-2012 05:03 AM


Originally Posted by Packard V8 (Post 8392935)
The Ruckstall 2-speed rear axle was a popular dealer-installed option on Fords from the 20s to the 40s. :-huh

Ruckstall's AFAIK, were only installed in Model T's.

ChristopherB 02-21-2014 07:33 PM

Good Evening All! I realize that this thread is over two years old; however, I was curious if either of the two axles (Eaton 2 Speed and Front) are still available? Please adivse - thanks!

ChristopherB 02-21-2014 07:41 PM

Good Evening All! I realize that this thread is over two years old; however, I was curious if either of the two axles (Eaton 2 Speed and Front) are still available? Please adivse - thanks!


All times are GMT -5. The time now is 10:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands