Anybody have a spare spindle nut?
 

I tried Ed the parts guy but the assembly has been replaced with a $100.00 part. I just need the nut and the retainer. The retainer is "C" shaped.

I have pics of it but they are on my home computer. I will try to post later.

Anyway the nut is the one that has all the grooves across the threads. Looks like holes when installed. The retainer fits into the grooves. It is 6 sided on the outermost part.

I need it for my D60 install. One of them was damaged when I got it. I can use the ones on my 250 axle but I was wanting to put it together on the stand and have it ready for when the install takes place.

My 250 auto hub and the 350 manual hub has them too. Others may have it also.
Thanks guys.

Try TJ , he may have one left over from the truck he parted out ...I can call him for you if you like ...

Wow. Nobody have one?
TTT

Tim's going to look in his parts ...

Hey Neal, I'll look tonight, I'm almost certain I have them in the box the left over auto hub stuff is setting in on the floor of my garage after doing my axle swap and pulling the hubs and spindle off my d50 before selling it.

If you can get a pic to make sure thats cool, otherwise I'm pretty sure I know the one your talking about....I can stick it in the mail, or if your not doing it till after the meet and great I can bring it there.

Justin

I need one too!!!! I have been looking for 3 weeks cause one is bad on my front. I need the c lock also. I just tried ed the parts guy also. Please someone find me one also!!!

Same one F250 HD auto hubs HELP!! I never thought to ask anyone if they had any!!

Yes I need the retainer also. That is what caused my nut issue anyway.

Justin I will not need it before the meet. So if you have one you can bring it there. I will pay you for it if you want.

Thanks,
Neal

Could you post up a picture of it so i know for sure what it looks like. I've got a spare D60 at my shop that i can look at to see if its got them. I've also got a parts guy that i go to that may have it if nobody else can get it for you.

Neal I might have some laying around from take offs. I will look tomorrow. if you can find a picture of what you need that will help a lot!

http://i480.photobucket.com/albums/r...0/100_2329.jpg

http://i480.photobucket.com/albums/r...0/100_2331.jpg

I hope these pics are viewable. I can't get photobucket to make any big pics anymore. That sucks.
I need to switch I guess.

I have the pics if you need them e-mailed also, just let me know.

The outer edge is six sided. The threads have the grooves cut across them as you can see.

I have 1 extra spindle nut. But i dont have the c clip. thats what broke on mine and had to buy the kit. But if any one wants it you can have it.

I have them, I'll snap a picture of them tommorow at work to make sure they are correct, so I'll bring them to the gtg on the 23rd....and no cost man, thats why I kept them, spares:D

427 fordman, your name is on the other one if you need it, just shoot me your address and I'll stick them in the mail.

Justin

the kit p/n is F6TZ-1K106-BB, it does not have the nut! it has the lock, snap rings, 2 steel and one fiber washer. the o ring and a new 4X4 sticker.
list price is $90.18
my cost was $56.57
your best bet is the double nut and lock washer and manual hub conversion.
most of the trucks I get in my shop with the auto hubs have broken locks and the left hub unscrews and destroys the bearings and the right side over torques the bearings and they get hot and lose their temper

I am switching to Warn Premiums.
My autos ghave done me wonderful for over 12 years no issues... yet.
Just keep good maintenance on them.

TNScrambler I thank you for what you are doing. I can't rep you again just yet but I can give you thanks.
I'll see you next week for sure.

Tim, Thanks for the offer on the nut. Keep in touch my friend.

I would love to have that nut and lock!! Let me know how much you want. I tried to send you a pm but couldn't.

I'm just going to put my address right here for you.
Darin Cranny
606 N Duff
Plankinton, SD 57368



Thanks so much. I've been looking forever and can't find these parts. You are a lifesaver!! You want some money let me know how much and I'd be happy to send you a check

REPS SENT