Dyno videos & new numbers.
Put the truck on Matt's new dyno Tuesday. I didn't hit my goal ,but came pretty close.
Vids. http://i269.photobucket.com/albums/j...h_100_0639.jpg http://i269.photobucket.com/albums/j...h_100_0640.jpg Dyno graph. http://i269.photobucket.com/albums/j...Picture001.jpg It put down 594 RWHP & 620 torque on 16 pounds of boost,15 degrees of timing. All motor no nitrous!:) Look out 11.50,here I come.}> |
Get Er Done Man!!
Man Phil, the truck sounds sweeeeeet bud. I am looking for a DYNO shop here in Southern MD. Anybody know of one in the vicinity?
With where I am at now, and after some mods, my 03 L should be in the low 12's if not high 11's now. It ran a 12.93 at 105 at 41 degrees F perfect weather and on a cool day outside. Since then the mighty L has received::-jammin 1) An additional 607 CFM by adding an Accufab throttle body Single Blade. Stock was a twin blade w/1089 CFM and now 1696CFM 2) Additional 2lbs of boost with a pulley swap 3) K&N CAI 4) Magnaflow Cat Back 5) Valve body for the trans. 6) Diablo Tuner Programmer SO...I think with this I should be in the 11's somehwere's rather easy.:-X25 Guys please let me know if you know of a DYNO shop. Headin to the swap meet 2-morrow if it doesn't get rained out again. Wheels to turn and rubber to burn!!:-headbang King Leo:-X10 |
Damn Phil, you going to blow someones doors off?
|
Very cool Phil. Sounds real good.
|
Awesome!!!!!!!!!!!
|
Congrats Phil!
|
Congrats Phil.
|
Whole crap, 594 HP at the wheels. Just image it with the nitro WOOOOOOOO!!!!!
|
WOW Phil, our truck is awesome!
|
Thanks guys and gal.
I could of hit 600 on the dyno but I'm running 2 less pounds of boost then before. We'll see what she runs at the track first at 16 PSI,then if I cant hit the 11.50 I'll put the other pulley on for 18 PSI.:-jammin |
Torque curve looks great - nice and smooth.
That thing's gonna fly when you hit the spray. 18 psi?:eek: |
All times are GMT -5. The time now is 11:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands