WAFTE Archived Buy/Sell/Trade ADs
 

That's right, this is the sales center of Washington State!

Chapter Buy/Sell/Trade Ads: Each chapter will have one (1) thread for chapter members to list items wanted, for sale or for trade. The rules for posting in this thread are as follows:

• Only Ford truck related items and automotive tools & equipment can be listed.
• Only one picture is allowed per post, per item. If additonal pictures are necessary, place a link in your post to those pictures. Additional posted pictures will be removed without warning.
• You must have your private messaging (PM) turned on and be able to receive PM's to post an ad in the Chapter thread. If you do not, your post will be removed.
• Use the PM or email system to conduct all discussion and transactions regarding the item(s). You can post your interest in the item(s) and that you’ll contact the seller but no discussions. Keep it short.
• If you post an ad, please reply that you found, sold or otherwise disposed of the item.
• The buy/sell/trade thread will be purged periodically for old postings. Generally every 30 to 60 days.
• You need to be an active Chapter Member on FTE to post a wanted, for sale or for trade item(s). No Exceptions.
• You must have permission from the Chapter Leader or a Regional Moderator to post an ad in a chapter that you are not a member of.
• If you are new to FTE (less than 15 days) or have less than 25 posts, you must contact the Chapter Leader for permission before posting an ad.
• Your ad or reply to any ad is subject to editing or deletion at discretion of the Chapter Leader, Moderators or Administrators of FTE.
• Commercial advertisements are strictly prohibited.

WAFTE achived buy/sell/trade ads

WAFTE Archived Buy/Sell/Trade ADs
 

265/70/R17 PIRELLII SCORPION TIRES FOR SALE. TOTAL OF 5 (SOLD AS SET) 4 HAVE 16,5K MILES, SPARE HAS 0 MILES. UPGRADED MY TIRES AND DONT HAVE ROOM TO STORE THE OLD ONES. ASKING $770 OBO.

CELL: 425.350.1976 ASK FOR JORY.

THANKS.

JoryLee

IM LOCATED IN KITSAP COUNTY AND PICS TO COME SOON.

I have a 351 Windsor In my 64 f250 I would like to trade for a 64ish 292. These would need to be swapped and I don't have equipment but may be able to acces some. There is nothing wrong with the Windsor, I am just trying to resort the truck to original condition or as close to it as I can. email me if you want some more information.

265 70 r17 tires for sale
 

this is an updated post with pics to the prior post I have up. sorry for the double post.

265/70/R17 PIRELLII SCORPION TIRES FOR SALE. TOTAL OF 5 (SOLD AS SET) 4 HAVE 16,5K MILES, SPARE HAS 0 MILES. UPGRADED MY TIRES AND DONT HAVE ROOM TO STORE THE OLD ONES. ASKING $770 OBO.

CELL: 425.350.1976 ASK FOR JORY.

THANKS.

JoryLee

IM LOCATED IN KITSAP COUNTY. This is the only pic it will let me post do to prior posting. I have more pictures if your interested. Thanks

starweb, do those wheels come with center caps?

no they do not. talking about timing. I put them up on EBAY a couple of days ago and they just sold. haven't had time to change the post.

craaaap. oh well - ya snooze ya lose, right?

Got a freshly rebuilt AOD with less than 2,000 miles on it for $1,000.00
Swapped it out for a ZF5 speed...

I have several items to sell, the first one is diesel only, the rest will work for diesel or gasoline engined trucks

1) I bought this 2WD S42 ZF-5speed last summer when I was looking at doing the swap in my truck. That was before I found out that you CAN'T just swap out a tailshaft housing (like on my old T-19) and convert it for use in a 4WD.

So anyone looking for a 2WD ZF-5? As mentioned before, it is an S42 model with the following gear ratios

1 -- 4.65
2 -- 2.60
3 -- 1.53
4 -- 1.00
5 -- .077
R -- 4.35
Looking to get $600 for it - which is a steal since I've seen them sold for nearly twice that much


2) I also have a good model 1345 transfer case WITH the "push down" typoe shifter on it. Will fit behind any T-19 or ZF5 speed. Best (reasonable) offer.


3) For those with a T19 and 3.08, 3.55 or 4.10 gears who want some lower gears for 4-wheelin or towing, I have an Advance Adapters Ranger Gear Spiltter. 17% underdrive. Basically the same effect as being able to switch your axle gears from 3.08 to 3.60, or from 3.55 to 4.15, or from 4.10 to 4.80 - on the fly - any time - and in any gear, because it is a fully syncronized box! It comes with shortened rear and lengthened front driveshafts to fit a standard cab standard bed truck and a heavy duty crossmember to go with it. This will work with a 2WD or a 4WD. Looking for $600 for the whole setup (Ranger, shifter, drivelines, and crossmember)


4) T-19 four-speed tranny. This is the close-ratio unit out of a diesel, and it comes with the diesel bellhousing. I took it out of my truck when I did the ZF swap last summer. You can change the bellhousing and put it on a gasoline powered truck, but the bellhousing it comes with is for a 6.9 or 7.3 diesel. It needs a new input bearing - about a half hour job and a $30 part. Asking $250 for it as is, or I can install the new input bearing for you for an extra $50.


Lastly, I am also looking for a pair of budd - wheel adapters and 3 budd wheels for the front of my dually (3rd wheel as a spare), so if anyone who's interested in any of the items above and has the wheels and.or adapters, we can talk trade + the difference in cash...

I'm getting a bunch of stuff together here, ready for sale. Most of this stuff will be up for grabs in a couple weeks:

300-6 engine, about 20k on it, DUI distributor. Block and head are 1980 parts, 8.7:1 compression, non-emissions cam. Ford 1BBL carb. $200
C4 auto, small block bell, fixed yoke, needs rebuild. $100
D60 full float rear axle, 4:10 gears open diff, $150
Mint 67-72 dash pad, black, $150
Near-mint 67-72 dash pad, some very slight damage to the speaker grill area but otherwise perfect, $100
68-72 interior door panels, $20 each
67-72 manual steering box, I have two of them, $50 each
Very nice 72 blue bench seat, comfort-weave vinyl, $50
I have a bit of a surplus of 68-72 odds and ends, -maybe- some body parts but no fenders just yet, and no tailgates. I do have a cool set of split rims, though.

A few more things to add:
Ramsey 8000lb PTO winch, the drum flange has some damage from having way too much cable on it, but comes complete with driveshaft, control, and PTO box that bolts on the side of the tranny. $350 takes it all
Near-mint blue 67-72 dash cover. Has two small fixable holes in the top, looks like someone mounted a CB there, but otherwise excellent and the rare medium blue color. $100
Set of four 16" eight lug split rims. Seem to be halfway decent, I don't want them though. Trade for set of 16" or 16.5" eight lug steel rims with some sort of tire on them.

looking for a basic chrome rear bumper for a 73-79 ford 2WD. with brackets. not a step bumper.

Compass Canopy
 

Looking for (2) original 1973-79 Ford Compass Canopies for my truck and trailer. Also, looking to swap my white trailer bed for a bed with the same color scheme as my truck.

https://www.ford-trucks.com/user_gal...id=181150&.jpg

Lift blocks for sale or trade
 

my new trailer came setup for a 4x4. had the lift blocks removed. anyone needs them make me an offer.

https://www.ford-trucks.com/user_gal...id=181152&.jpg

also, looking for chrome "POWERED BY FORD" valve covers for my 460.

Ok, I'm getting ready to start stripping down my parts truck this weekend. Short notice emergency job, need the room it's taking.
Anybody need 67-72 parts? Not a whole lot of good stuff on this thing, but the seat isn't bad, instrument cluster, 303 3speed tranny, big bearing 9" rear, and not much else. Radius arms have already been spoken for. Drum brakes up front. The body is pretty rusty, but there's good glass to the sides and rear.
I'm going to drag it up onto the trailer and pull the running gear out from underneath to prep it for scrap.
I take trades, if you need something let me know. If you need something bad, come get it.

On Edit:
The rear end is a 3.25 limited slip 31 spline unit. I have it on CL for $250, make me an offer. Complete with good rear parking brake cables, and junk tires.

'79 F150 Bench Seat For Sale
 

Good Seat. nothing wrong with springs or foam. needs to be recovered. removed the tracks for my new seat. $50.00

https://www.ford-trucks.com/user_gal...id=182501&.jpg

https://www.ford-trucks.com/user_gal...id=182502&.jpg

I have a Radiator Brand New! for my 99 250 SD V10. 75.00
I NEEEEEDD a radiator for a 97 Taurus V6

Is that the new body style or the old body style?

um, oval rear window... New I think> Not the square "K" car looking thing.

I have the older style, sorry

NO PROBLEM, THROUGH ONE OF MY "CONNECTIONS" I GOT ONE BRAND NEW IN THE BOX DELIVERED TO MY HOUSE YESTERDAY FOR THE GRAND TOTAL OF 0.00
i DIDNT WANT TO PAY THAT MUCH BUT, SOMETIMES YOU HAVE TO BITE THE BULLET

Sorry about your luck Marty LOL

For Sale: Haynes Manual '99-02 Super Duty
 

HAYNES MANUAL #36060 - Ford Super Duty F-250, F-350 Pick-Ups and Excursion, gasoline and diesel engines (99 - 02)
Does not include F-450 or F-550 models
http://ecx.images-amazon.com/images/...ZL._AA280_.jpg
I ACCIDENTALLY BOUGHT TWO MANUALS ON AMAZON.COM
$15 SHIPPED OR $10 IF YOU COME AND GET IT-I'M IN GIG HARBOR
JOSH - 253-226-8787

Fishing expedition-
Anybody have a saveable 390? I can trade a full float D60 with 4.10 open gears, C6 for an FE, rebuildable c4 for a smallblock, and 68-72 interior parts.
I am also after a 72 or earlier power steering column, with no shifter.

Wanted to buy: Small travel trailer, in the 12-14' range that can be pulled behind my Bronco. I'm on a limited budget, but hoping to find something decent. So far, Craigslist has let me down, so why not try fishing around on FTE? Hopefully I can find something so my wife, son and I can take a few days vacation this year.

Keep an eye on the free section, they pop up every now and then.
Could always go with a slide-in on a bed trailer..............

Anybody have a set of four or five 31x10.50R15 or 32x11.50R15 All Terrains? I need something much less aggressive than the M/Ts that are on the Wagoneer now, but that still not highway tires.
Bonus if they're mounted on 6lug aftermarket wheels-

I need to find 2 rims for my boat trailer. The rims are 15" 5 lug on 4-1/2 bolt pattern. I do not want to go standard steel rims as I use it mainly in Salt water.

2006 Power Stroke Diesel For Sale
 

I have to sell my truck for my own reasons. I dont want to but It looks like I might need to. the following link has all the details email me for anything else you want to know.

Thanks
JoryLee

2006 FORD F250 SUPER CAB LONG BED POWER STROKE DIESEL 4X4

For sale OEM wheels and tires- Kennewick, WA
 

2005 OEM 18" chrome steel wheels and Continental Contitrac TR 275-70-18 tires $200 OBO. The wheels are in excellent condition. The tires are siped and have about a 1/4" of tread. Pick up only, no shipping.

Powerstroke for sale!!!!
 

White 97 Supercab Longbed F250 Automatic Powerstroke 191,xxx miles with 3 inch downpipe into 5 inch bullhauler stacks. Front add-a-leaf, tymar intake. Autometer cobalt pyro, boost, and trans. 1.0 Turbo Housing. New IDM, 285/75 R16 Tires as of January 2008. Alpine indash cd player with ipod hook up. Will post pictures later. 9,000 OBO (253)-224-8356 or email for pics. am_stpierre@comcast.net

I have a 300-6 with low miles (about 20k), with a DUI HEI system from Performance Distributors, complete air cleaner to pan. Only oil leak is from the pan gasket, no oil burning at all.
Make an offer/trade. I have it on CL for $500, but the WAFTE price can be less.

Is the motor basically stock except DUI, or is it mildly built?

It's mostly stock, but has the pre-68 non emissions cam and timing set, so no retarded timing. Lots of low end torque.

Tires For Sale
 

265/70/R17 PIRELLE SCORPION TIRES WITH 16,5K AND BRAND NEW SPARE FOR SALE. MAKE ME A RESONABLE OFFER AND LETS TALK. i DONT DILEVER AND CASH ONLY. IM IN KITSAP COUNTY WASHINGTON.

PM HERE OR AT YAHOO AND I WILL GET BACK TO YOU THANKS.

JORYLEE

$175 OBO....

Wheels
 

Rick,
Sent you a PM. I'm in Benton Co.

SOLD......

Make me an offer and I'll even deliver in western WA- I really need this engine gone, it's taking up more room than I have.