74 F250 XLT camper special, the ring and pinon are chiped and need replaced the rear is currently off the truck. 500obo it was taken off the road in Dec. ran then still starts but havent actually driven for a month.

in snoqualmie I can get details via PM if you are serious.

EDIT- GONE

Hey all- new member to the site- just have a quick one to tell you all that I have a 1961 Ford F100 Flareside up for sale. It has 3 wheels- I lost an axle on the way to work one morning- it has the original 223 and tranny, runs great, and looks ok- surface rust, and one spot in the left rear quarter is through. Plywood for the bed due to not having time to locate rails and slats. It was a coming home from Iraq present from my wife in 2004, and has sat in my garage since 2008, running at least once a month. Please email me at lambo889@aol.com if you have any interests in it. I'm currently in Afghanistan, but will be around WA in the summertime. Thanks you guys!

Got any pictures?

Looking for dually rear end for 97 cab and box,not cab and chassis frames are diff.,
Thank you

looking for dually fenders for a bed

parting 77 f350 2wd crew cab
 

parting out my 77 crew cab dually 2wd pm me for what you need . thanks Todd

Hey guys, got another one for ya.....the AOD transmission out of my '87 F150. It has less than 150 miles on it since I had it fully rebuilt (was in a pinch and just needed to get down the road). Has $1200 worth of work done to it (new clutches, valve body, HD torque converter)......selling it for $500. I have copies of the receipts available upon request, or originals if you want them(they'll just take more time). PM me if you're interested and want to know more info.

No, it won't!! :-jammin I found the file, Hun. I'll scan them in and e-mail them over to you tomorrow!!

Rare Alloys for sale/trade
 

I have a really neat set of wheels I found for my Bronco, but the future calls for a wider set.

these are 15x6 part number E2TA-1007-EB.



http://www.supermotors.net/getfile/7...llsize/035.jpg


lets work something out, I have a 1987 300-6 good core I can throw in for the right wheels. I would like some 15x8 or 15x10 aluminum wheels.

Wheels reduced to 200. Ill ship buy buyer pays cost. thx

No, they won't!! I found the file, Hun. I'll scan them in and e-mail them to you this morning.:-jammin

1965 F-250 Custom Cab 4x2
 

This is a 1965 Ford Custom Cab 2 wheel drive truck. The odometer shows 24,000 miles and judging by the brake pedal pad wear I would guess the truck has 124,000 miles on the clock.

It is powered by a good running 302 V-8 from a 1978 LTD and has a bad (stock) C-4 automatic transmission. Good items are power steering, new battery, Dana 60 rear end (limited slip with 4:10 gears), and good tires. This is an eastern Washington truck and the rust free body is in good shape, the only rust in the inside front of the bed. It will move forward sometimes when the transmission is hot, reverse works fine.

Has collector vehicle plates and I have a clean title in hand. Would make a great driver with the transmission seals replaced or part it out. I have a few other photos I will email if you want.

I am located near Tacoma, WA. Price is $875 or best reasonable offer, Cash only.

https://www.ford-trucks.com/forums/p...ictureid=28651

need 73-79 parts
 

need both door panels for my regular cab 79.
no damage or cracks. in brown or black.
also, looking for two good tailgates.
they have to be straight, no curves, so my canopies fit snug.
dings are ok.
thanx

This ad is for a used set of 315/75R 16 Cooper Discoverer STT tires with about 50% tread left (tread now is 12 32nds, new tread is 20 32nds). I took them off my truck and can mount and balance them for you including the price of the tires for $500.00.

AND

I am swapping a solid axle into my truck, so I have a 6" lift system for the front that is for sale (I am keeping the rear springs) that will fit a Ford F150 years 80-96. Comes with everything for the front half of this kit:
5.5 inch Superflex/Prerunner Kit 1987-89

This is coming with:
TTB 6" drop brackets
Radius Arm Drop Brackets
Deaver 5.5" Superflex coils
Stainless steel braided brake hoses
Drop pitman arm

If you're serious and if you want, I'll even throw in my polyurethane bushings for the TTB arms and the radius arms. I only put this kit in last year, so everything is still good.
Price for the front half kit is also $500, and it flexes just as good as it says it did from day 1.

I'll take your tires!!

I really need some and I'd rather give the money to you than some yeah~hoo!!

Is this the one you lowered with DJM stuff?