1964 custom cab molding
 

If anyone has any side molding fo sale please contact me at tuefelhunden88@aol.com
Thanks, Art

1966 CC Camper special 250 moulding
 

I've got a complete set of moulding that came off of a 1966 f250 custom cab camper special. The moulding is near perfect. I have the emblems, both sides and hood. A complete set up. I believe it is a long bed. If interested contact me

What parts for the 63-4 molding set are you after...and which body/bed type is your truck...there were THREE different moldings for bedside depending on unibody or not, 64 styleside with the 64-6 type 2wd bed and one for the 57 up bed used thru 64 on 2 and 4wd trucks as well as 65-6 4WD trucks...I do have a few pieces though...


- cs65

I have a 64 swb custom cab I have the hood pieces I need from the cab to the bed.
Email me some pics if you have any. tuefelhunden88@aol.com
Thanks, Art

gangstakr - I am interested in your 1966 f250 mouldings. I believe they will fit my 1965 F100, if they are for the long bed. Email me at thomsen@techie.com

Thanks,
Alan

1965/66's use the same mouldings.

All Camper Specials had 8' beds.

Check your e-mail.

i could use the trim for the 64 i need the bed side pieces for the 64-66 long bed i mainly need the dirvers sidbut could use extra. thanks
Kyle

I have been excited to put the side trim from my 65 CS on my 66 4x4 until I read this thread. Now I find out the bedside moldings are too long for the old 57-63 style box.:-banghead I guess I will have to shorten them nicely at the forward end, for I doubt I'd ever find the right ones in good shape. :(

ya...65 amd 6 2wd moldings wont work on the 4wd's...
as a complete set that is...


- cs65