Goodbye Ttb
Well boys I had so much fun takin a torch and droppin that junk off the front of my truck last friday!!!! Found a donor axle on wednesday night online bought it thursday morning and it took me eight hours to do the conversion!!!
|
i am going to be doing this soon and i have the same truck what did you do for the rear drive shaft how much did you drop the center
|
Originally Posted by fmco_muddin
(Post 6302581)
Well boys I had so much fun takin a torch and droppin that junk off the front of my truck last friday!!!! Found a donor axle on wednesday night online bought it thursday morning and it took me eight hours to do the conversion!!!
Any lift on your truck? Did you use stock front leafs? |
Very nice! congrats!
|
Cool! That's great to hear.
|
I used the spring pack that came with the donor axle. No lift it just leveled my pickup up! the only thing i had to change was the output yoke on the transfer case to match up with the drive shaft from donor axle. Big bad wolfe I didnt have to mess with the rear shaft at all.
|
Originally Posted by fmco_muddin
(Post 6305143)
I used the spring pack that came with the donor axle. No lift it just leveled my pickup up! the only thing i had to change was the output yoke on the transfer case to match up with the drive shaft from donor axle. Big bad wolfe I didnt have to mess with the rear shaft at all.
|
Originally Posted by fmco_muddin
(Post 6305143)
I used the spring pack that came with the donor axle. No lift it just leveled my pickup up! the only thing i had to change was the output yoke on the transfer case to match up with the drive shaft from donor axle. Big bad wolfe I didnt have to mess with the rear shaft at all.
|
came from the donor truck
|
Originally Posted by fmco_muddin
(Post 6309325)
came from the donor truck
|
If you find one jump on it!!! I looked for six months trying to find a deal but never did ended up finding one one hundred miles away and paid a little more than i had planned but I have no regrets!!!!!!
|
fmco_muddin, Did you notice a tighter turning radius with the Dana 60? I herd after the swap the turning radius was better. Thanks.
|
i guess i havent paid that mch attention to that. If it is tighter must not be enough to stand out
|
Originally Posted by fmco_muddin
(Post 6312176)
i guess i havent paid that mch attention to that. If it is tighter must not be enough to stand out
Ok Thanks. I was trying to out that as an other excuse to do it. :) |
now i just want sombody to hit my other thread on how big of tires i can fit under the old girl now
|
All times are GMT -5. The time now is 02:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands