First Batch done FEEDBACK please
 

I had my first successful batch this past weekend. I guess the 3rd time is the charm. I have learned a lot about this and I am almost done building my 40 gallon processor. Please take a look at the pics and let me know what you all think. Any suggestions/recommendations are greatly appreciated. I put this one and a 4 gallon (using 5 gallon jugs) processor together for my testing. Works pretty good though- especially now that I know what I am doing a little better.


http://www.leetfx.com/site/files/5/processing.JPG

http://www.leetfx.com/site/files/5/settling.JPG

http://www.leetfx.com/site/files/5/wash%20test.JPG

http://www.leetfx.com/site/files/5/finished.JPG

Looks great Dave! Isn't it great when you finally get it. I love the fact that you used whatever was laying around. I started out like you 5 years ago with junk I had in my boneyard ( no $5,000 factory made processor for me!) I built 4 different processors and hundreds of mods along the way and have done very well. Never let people tell you "you cant". You just proved them wrong!

Good Job! :-bigparty

It was a really great feeling when I did the wash test and didn't get soap! LOL!

I run the processor (drill) for an hour. Should I run it any longer? I then let is set for ~24 hours.

I still haven't gotten my titration kit, so I just used double the lye that clean oil requires. I didn't think it was going to clear like that.
That used oil cleaned up nice. there are some more tweaks I need to do to the 5 gallon jug processor, but it works well.

Wow, did you use wvo or motor oil? I got to start doing this, i,m not going down without a fight. I love my truck to much. Great job dave, i,m impressed.

WVO. good thing about where i am getting it from is that it's 100% soybean and used for french fries. it's pretty clean to begin with so that helps a lot. like I said, I haven't gotten my titration kit yet, so I just doubled up on the lye for this attempt. Looks good though.

Now it all depends on how much wvo I will be able to collect every week. Some people I have approached would rather pay to have it hauled away than give it to me as I "might make some money" on it.

Thanks for the info David. Looking forward to your .PDF once you get it finished.

Lisa -

we need to look in to this again - i've got the garage space, just gotta make sure I don't blow up the place....LOL

What is going down everytime I try to edit I get another post.
Oh well try again

OOOPS I goofed, double post

You cannot make BioDiesel from Motor Oil, used or new.

Whew finally got it done

Ive been seriously thinking about purchasing a home biodiesel processor. The one I found is 5,000, but 4 other friends might chip in to purchase it. Claims to make 40 gallons in 14 hrs. Pretty much automated. I also stumbled into the vegistroke. Apparently it is a kit you install that will allow you to run straight vegetable oil. Anyone else see this thing?

You wont blow anything up...you just might make a bunch of soap, though.

I know I know, i want to STOP paying $4.50 a gallon for diesel its just absolutely nuts.

That soap we made with the "dr. pepper" funky method works great. We mixed it in with our gojo.

I just got the PDF done. Anyone interested in it needs to send me an email addy where they want it sent.

Thanks, David.

Don't know what I'm doing wrong. I can't pull up your pics. Tom