Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   Maryland Chapter (https://www.ford-trucks.com/forums/forum186/)
-   -   Repair Shops in MD (https://www.ford-trucks.com/forums/572543-repair-shops-in-md.html)

Tractor Boy 01-25-2007 07:46 PM

Repair Shops in MD
 
This thread is for repair shops in MD
Please use/post accordingly..................
We will use a 5-star rating system, heres how it will werk
5 stars=Excellent service, 3 stars=dont know, 1 star=stay away from
please list the name, address (at least the street that its on and what its near) the city, county. thanx for your participation. also what u know they do

firewood 03-27-2007 10:48 AM

Shops in MD
 
Chesapeake Auto in Centreville ,MD
Is there a lower rating than 1?
1) Job took 3 days instead of one
2) Charged $75.00 for shop supplies
3) Left the steering wheel sticky and greasy foot prints on the door sill
4) Charged 40 plus % above retail for the new turbocharger
5) Went back and talked to the owner about above, he said he would look into it and call me. 2 weeks later my phone is not ringing.

Don't let them rip anyone else off
Firewood

suicide29 04-17-2007 05:06 PM

I use Teds auto in Accokeek Md they have always done a good job for me. I'd rate them a 4

CyberRad 05-17-2007 10:23 AM

Midas of Prince Frederick
Corner of 231 and 4 in Calvert County
I rate the whole shop a 5!

They are always there to help me out no mater which vehicle I bring.
89 Ford Mustang GT Drag Car
04 Ford F-250 Harley Davidson
04 Ford F-150 V6
99 Pontiac Grand Am Twin Cam
90 Chevy Lumina 3100

They even help me do custom work as well as suggest custom work.

Tractor Boy 05-17-2007 02:13 PM

Tractor Boy's Driveway, full service redneck custom/mod shop, Arnold MD, lmao it where I did the clutch and am doin my exhuast, and a few other things

glruff 05-17-2007 03:20 PM

You didn't give a rating TB, hahahaha. Minus what? lol

Tractor Boy 05-17-2007 04:44 PM

10 stars, all around!!!!!!!!!!lmao

Rok 06-03-2007 04:00 PM

Hey everyone, new member obviously... Does anyone know of any shops in the Baltimore/Harford area? I've got a new to me 96 f-250 diesel, that looks nice on the outside, but is turning out to be a major headache everywhere else. (electrical gremlins)

Truck supposedly needed a new transmission and torque convertor - got that done at aamco(which I dont think I will ever go to again) they had the truck 2 weeks and still didnt fix everything trans related. Still need an oil pan gasket - trans oil drips out while running.

They find out that there is a misfire in cylinder 3, which is causing the new transmission to feel exactly like the old one. ( so I wonder if it really needed a new one or they just needed money?)

Sorry for the long first post -

cliffs: does anyone know of a good diesel mechanic in the Baltimore/Harford area?
thanks

Mr Bob 07-24-2007 05:29 PM

suicide29 - Ted's in Accokeek?
 
Where is Ted's? Is it where Old Towne Motors used to be??

Thanks.
Bob in Waldorf

Mr Bob 07-24-2007 05:37 PM

suicide29 - Ted's in Accokeek?
 
Where is Ted's? Is it where Old Towne Motors used to be??

Thanks.
Bob in Waldorf

80351 12-29-2007 04:55 PM

Gears and Rears
 
I haven't used this place but I few on another forum were looking for
places that did rear ends and gear work. These people according to what was said have built rears for so PRO trucks including Gravedigger for one and I think it is a small shop.

www.ONETONREARS.com


Dave

BPofMD 01-29-2008 10:10 AM

If you HAVE to use a pro shop, I have dealt with two that I trust to do ANY work on my vehicles. I use Rich Morton's Lincoln/Mercury in Pasadena for my Lincoln and Miller Bros FLM in Ellicott City for my diesel. In the (quite a few) times I have HAD to use a pro shop, I have never been anything but very satisfied with their work. Oh yes, Miller Bros DOES have qualified diesel mechs on duty.

80351 01-29-2008 05:37 PM

Gosh,
I can remember a time when Millers wouldn't be caught dead working on anything but Chebbies, now that's going back a good ways.
Got you other questions about your trailer, I'll ask my boss about it matter of fact I'll answer you from there
Dave

BPofMD 01-31-2008 03:49 PM

I didn't know where else to put this where it would get optimal viewing.

If anyone requires to refer to a maint. manual including electrical schematics, go here:

http://www.bedlib.org/ebsco.html

Click on the "AARC" box and use the word "library" for both the user name AND the password. It has many, many manuals listed.

Don't forget to put it in you "FAVORITES" list so you don't have to keep coming back here to find it!!

Surge08 02-08-2008 11:23 PM

Quality Discount Mufflers & Brakes
7720 Wise Ave
Dundalk, MD 21222
(410) 288-0600

Excellent Custom Exhaust Work


All times are GMT -5. The time now is 07:37 PM.


© 2024 MH Sub I, LLC dba Internet Brands