Website For Int'l Graphics/Emblem (VT365)
 

Hey guys,

While reading the latest issue of Diesel Power magazine (Jan '07-page 114), they showed a guy that utilized the Int'l emblem for the 7.3L and they have them for the 6.0L PSD as well.

Here is the link for those interested....

http://www.bellaphotographics.com/in...onal/index.htm

Great way to add/showoff that we have an Int'l motor and which series it is.

Hope you guys like the link... let me know what some of you think of them if you should buy them.

Jeff

They look cool. So would they replace the F350 SD badge? or go underneath it. If it is to replace the SD badge how do you get it off?

Aaron, the fender badges have two locater 'pins' on the back which go through holes in the fender. The badges have an adhesive strip on the back.


You can heat the badge with a hair dryer or paint 'heater/remover' and then carefully pry the badge loose with a putty knife. Use a thin piece of wood or plastic to protect the paint while prying. Unless you're very careful, the original badge will bend and crack. Some recommend using fishing line and sawing it back and forth behind the badge to cut it loose. Wear gloves for that or your fingers will come off before the badge.

After all that, some of the adhesive will remain on the paint so you'll need to clean that off prior to installing the new badges.

There are no pins on the tailgate badge nor holes in the tailgate underneath that badge.

As soon as I saw them last night while looking through my Diesel Power mag, I thought that I should get them. I slepted on the thought overnight and I just got done ordering them! I suspect they will run out quick since I can't imagine them having too many in stock and now they have the advertising in a magazine (at least mentioned and shown in a magazine) the interest in these is going to go up.

Some time ago, someone else mentioned these labels on this site and I checked them out then but I don't recall them having any "installed" pictures of them so I was afraid to order them in fear that they wouldn't look right. Based on the pictures in the magazine, I think they look GREAT!

Now my only concern is getting the old ones off cleanly........???

Now What would be cool is IH mud flaps for the rear. Would the big truck flaps work with some trimming?? Just curious. But thanks for the post Beach. Gonna order mine today.

Glad you guys have ordered... let me know what you think of them. My wife has me on a short leash right now for spending money on my truck (dam, I wish she would make more money so I would have more to spend)!!!

Is it just me or do those badges look a little flat to you gujys? What I mean by that is they dont appear to be 3D, they look kind of like a sticker on the side of that red truck. Maybe its a bad photo. I like the idea of putting something from International on my dually though. When the first guy gets these badges, try to report back and tell if they are flat like a sticker or it was just a bad pic on the website. thanks guys.

Based on the pictures in the magazine, they are not stickers. That is why I did't order them originally, I thought that A: they might be a sticker and B: I wasn't sure of the size. If you can find a copy of Diesel Power Mag (Jan 07), take a look on pg 112.

I will post some pics as soon as I get mine on.

thanks eb2006, i think I have a copy of that issue in my room, I will have to take a look. I love the idea of putting those badges on my truck, but just wanted to be sure about how they look.

Hey great find, I will be ordering mine! Off subject, is the 08 psd gonna be twin turbo?? Didn't think there was room for twins or even compound twins.

Thanks for the great info. I spent a lot of time doing GOOGLE searches for those badges. I was getting ready to contact the magazine to find them. Thanks again.

i love the diamond one for the very front of the front fenders !!!

just ordered my set.........love the idea of shaving off the PS badge and replacing it with a set of these Intl badges.

So are these emblems or decals?? I would like to get a set if there actual emblems. If you guys look in my gallery you can see how I removed my F250 badges from the fenders and put my turbo diesel emblems in its place. There is two holes there, (the turbo diesel emblems barely covered the holes) and there is holes in the tailgate as well.

Hey Beachbum check this out.

https://www.ford-trucks.com/forums/5...-pictures.html