ATI P1-SC w/ 12# pulley dyno.
 

http://img528.imageshack.us/img528/4...dec20050pp.jpg

Here's a comparison to a dyno I had from over a year ago.

http://img513.imageshack.us/img513/5...noexcel1fn.jpg

This was with a badly slipping blower belt as well which is why it drops and picks up a little after the 4600 rpm mark. Got that fixed a few nights ago and did a little playing around with a friend's new LM-1 wideband meter. He got the fully optioned package and it's a blast to use. Saw 13.1 psi before letting out in 3rd...so there is a little more available.

That torque curve looks good...nice numbers.