Another roll call
 

I think March was the last roll call. Who's still out there. I'm Mark from Saint Paul.

Mike from Melrose, SDCC 5.4 285/75/16

Ben from Mankato/St. Boni

plowpusher from lino lakes 75 f250 4x4 ,76 f250 4x4 , 77 f250 2wd 460 auto ,and a bunch of 73 -79 parts

Peter From St. Peter (like 11 miles away from mankato). 85 F150 flatbed 302 MAF conversion with A9P processor and 24 lb/hr injectors.

Still here up in the Milaca area. Just getting settled into my new job so hopefully I can be on more.

James, St.Paul, 90f-150, 99f-150

Scott from zimmerman. Settled into new home and marriage. Always around...haha.

Jeremy from Princeton. Not around as much as I would like.

Hey, brian here from Mankato (MSU) or Scandia, depending on whether or not i'm at school.

Hey, i just got my letter of acceptance from MSU. What year are you and what are you going to major in?

I am a sophmore, but it's my first year, i transfered. I am a major in civil engineering though and now i'm pretty comfortable around here and love it. You have any questions or anything let me know.
brian

Yeah i will, my GF goes there right now. Shes a freshman. I cant wait for college, you live in the dorms? or do you have an apt?

I got an apartment right off campus, its way better than the dorms and we manage to have a good time. This spring we'll have to go muddin with broncoholic or something. brian

Brainerd
 

I live in brooklyn center. But all the toys are up in brd. Starting a new truck this winter. Got it stripped to the frame so getting there. Gonna use f-150 frame and put a roll cage on it. It should do the trick. Have lots of fun up in brd. Our club wheeles about 2 a month so always something going on.

Craig from Northern Anoka County

Grant from Savage

Nick from Pequot Lakes

Bruce from Hanover, MN. We have been working on my son's '55 F100 for less than a year.

Mr Bill No. Mn.
 

Bill from Bemidji here.

pat from buffalo
2005 ford Ranger xlt 4x4 exted cab bright red 245ci v6 5spd auto 4.10 rear

Zach from lindstrom

Welcome to FTE, thats a nice truck man!!!

roll call
 

Julie from Hanover Mn I have a 54 f100. Havent posted in a while tho! Julie

Hey all, Cory from St. Cloud poppin in. Sold the house so have to pack up PC so check in when I can! 99' F-250 PSD :-X22

Rick from St. Francis, 68 F-100 (for sale), 84 Bronco-302 C-6 33" tires, 91 F-150 extended cab-5.0 AOD 4x4
Hey mudman, where in Anoka county you located?

Josh, Mankato on the offseason, The duck blind during season:-X07

'79 F250 4x4 400 four speed dana 60/704 inch lift and 38's, '75 bronco 302 C4 4 inch lift and 33's. Osceola, WI I joined the Minnesota forum since I'm so close to the cities and originally from MN. FYI - I'm a member of the Minnesota Go-4 Wheelers, so if anyone has questions about Memorial Total Off Road Rally on Memorial weekend, let me know.

Lowboy, does your 79' have a dana 40 front end?? I have a 79' with a 400 and 6" lift and was thinking about tires. People were saying 37's is about all i would want to get on the front end.
country

My '79 has a 60 front and a dana 70 rear. Hhould have put a space between the 0 and the 4. The rear is out of a '83 F350 4x4 Diesel. How hard do you wheel your truck, and do you have a locker in the front? If you have a locker in the front, I wouldn't go above 35's if you wheel a little and have stock shafts. If you are easy on it, I've seen as big as 39's on a 44 front, not that I would suggest it. FYI- I ran 38's on my truck with the 4 inch lift with the 60, wheeled it hard and never broke a front axle shaft. The 38's also fit with only minor trimming on the front corner of the front fenders.

Brian from Cannon Falls. I've got a 1995 F150SC 4x4 that is in the process of a frame-off restoration. Replacing the stock 5.0 with a built-up 5.8. Started the project in October and hope to have it back on the road by March. Almost everything is getting painted, upgraded or replaced. I have found this web site very helpful with my restoration.

Thats awesome, someone restoring a pre 97 f-150! Hope it turns out well!

Jon eden prairie

Travis... Willmar

Jim......Dent Mn.

Mike...... Watkins

MSU is a good school. I attended for a semester in the Mechanical Engineering department. I am finishing up at the UofM.

Wow, just got the tour of MSU, and i cant wait. We got to stand in the room with the chassis dyno, and they showed us all the CNC's and milling machines and some of the projects they are doing. Its all pretty cool looking. I'm going to go for Automotive Engineering Technology major, and i guess you automatically get a Manufacturing Technology minor with it. Sounds like fun to me.

Yeah, we're doin a bridge design for a competition with all the surounding universities UM, UMD, Iowa, NDSU, UND, SDS, for civil engineering and we've been in the lab usin the mills and plasma, tig, and mig so i've spent a fair share of time in the ETL.